Recent content by mclarceny

I switched the remote to band B(the switch under the battery cover) and it worked perfectly. Weird. Thanks for the ideas guys.

I just installed a 722 with a dish 1000+. The last thing I needed to do was program the number 2 remote and make sure it worked. It did not. First I thought it might be on the wrong channel, so I took it to TV1 and went to the system info, changed the remote channel (change it to 7), and hit...

I did not replace the seperator, because I could not see how it would be good yesterday and this morning, the go out the come back to life and work fine. I guess this is the ultimate question: which part would fail in this way? In my experience, when a part fails, it fail forever. I have seen...

Sorry, but when I went to signal strength after the reset , it would find a signal for the the one sat

The check switch went from 1-1 then ran all of the 1-38 2-38.. Then came up no x x x with the proper switch detected

I have a customer who is having a strange issue with a 722. It only recognized the sat corresponding to the LNB output on a 1000.2( i.e. port 1 only 119 or port 2 only the 110, ect..). They also have a 322 that works just fine. I swapped the LNB, still happening. Ran a test cable, still...

Articles in the wall street journal are bias just like any other news paper. Wall street journal == Rupert Merdock == Direct TV