Recent content by rglore

Apple’s hdmi adapter has a connection for power, I use a 6’ charge cord.

You could do that or just connect your wing dish to the input of the new LNB. The DP34 is not DPP so it requires two lines to a dual tuner receiver.

Just what I've been looking for.

Some Eastern Arc customers have their locals on the 77 satellite. The new hybrid LNBF does not see 77 so you would need an additional wing dish. Probably the issue.

Nope, just works.

That's what I do when I need a Joey somewhere else for awhile. Works just fine, so does an Ethernet cable.

I like putting the OTA in a side by side PIP with the same local channel from satellite to see how it compares to the satellite one. Usually cannot tell the difference except for the 10 second delay on the dish one.

You only use taps on lines going to Hoppers or Super Joeys to add a standard or 4K Joey, splitters are for multiple 4K or standard Joeys only. 4K Joeys wire up just like a regular Joey.

That's how to use a duo node if you don't have a single node. The first line from the dish is only used for the first Hopper, the third line from the dish is only used for the second Hopper, and the second line is used for both Hoppers.

Supposed to use skip forward/back buttons to change tabs now.

Unless a HIC is detected.

I believe the Dish 500+ is the one with the DP 118.7 LNB.

Doesn't have a dead eSATA port.

This is what I use...

I just mirror with a high quality RF modulator on channel 55 to a half dozen TVs. Everyone thinks it's HD but it's not. SD on small TVs can look pretty good when HD is the source. All the remotes work OK but one that I have to hold near a doorway and the source Joey is vertical for a stronger...