Giveaway - Win a Brand New SG9120 Motor & WS9036 90cm Satellite Dish

Status
Please reply by conversation.

WSInternational

SatelliteGuys Pro
Original poster
Supporting Founder
Sep 24, 2005
370
0
Los Angeles, CA
We are giving away a brand new SG9120 DiSEqC Motor & a WS9036 36 inch Ku band dish

http://www.galaxy-marketing.com/diseqc-motor-sg9120-hh-mount-for-satellite.htm


-Communication protocol DiSEqC 1.2/1.3 Level
-Maximum dish diameter 120cm
-Diameter of support pole (35 to 68)mm
-Dish support length 145 mm
-Dish support diameter 42 mm
-Starting movement consumption (Max.) 350 mA
-Programmable position ( DiSEqC 1.2) 49 satellites
-Rotation angle 70
-Rotation speed 2.4/s(18V) 1.5/s(13V)
-Operating power supply 13/18 V DC
-Consumption in stand-by mode 40 mA
-Consumption in operating mode 180 mA
-Preset positions (DiSEqC 1.2) 28 satellites



90cm Ku Band Offset Dish
Model No WS9036
Panel (Sector Divided) 1
Offset Angle 24.62°
Aperture Diameter Short Axis 90cm
Long Axis 99cm
Ku-Band Gain @ 12.5GHz 40.32dB
F/D Ratio 0.6
Focus Length 24 Inch
Material Steel
Finish Polyester Powder Coating
Mounting Type Pole & Wall
Elevation Alignment 0°~90°
Azimuth Alignment Fixed/0°~360°
Operational Winds Able to receive 25m/sec
Able to re-set 40m/sec
Without Damage 60m/sec
Ambient Temperature -40°C~+60°C
Relative Humidity 0~100%




-------------------

This is open to any member of SatelliteGuys. Must be at least 18-years of age or older. No purchase necessary. Free shipping within the continental USA only.

-------------------

To win, simply reply to this post and say "I want to win the new SG9120 Heavy Duty DiSEqC Motor & The WS9036 36 Inch Dish"

Random drawing will be held on at 11:59PM 10/31/2009 and announced on 11/1/2009.

 
I want to win the new SG9120 Heavy Duty DiSEqC Motor & The WS9036 36 Inch Dish
 
Last edited by a moderator:
"I want to win the new SG9120 Heavy Duty DiSEqC Motor & The WS9036 36 Inch Dish"
 
I want to win the SG9120 motor and I will give the dish to another member here because my HH120 on my 1.2 meter dish just died. And I will throw in a HH100 motor to move the dish for them.
 
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)

Latest posts