Motor for Winegard DS-3101

I just put in my order for a Winegard DS-3101 and need some help on choosing the right motor for it. I have read that someone else in this forum has used an SG2100 successfully on this dish, but with some modifications.

If any of you have experience with this dish and a motor, please shed some light on my situation. I'd like the motor installation to be as hassle free as possible and the motor, itself, strong enough to turn this 1 meter beast.

Thanks in advance for your help.

Thanks PSB,

That link was very helpful. Looks simple enough to me. While I have your attention I was wondering what you thought was the better receiver...the Fortec Lifetime Ultra or the Satwork 3688. The two most important features I am looking for is picture quality and weak signal receiving strength. I know the Fortec has the AC3 output and the USALS feature, whereas the Satwork doesn't; are there any other major differences I am overlooking? Are there any other receivers (aside from the pansat 2500) that I should consider? I'm looking to spend up to $250 for the receiver.

Any other members feel free to chime in with their opinions.

Much thanks.

Thanks PSB,

That link was very helpful. While I've got you here, I had just one more question about receivers. I have been looking at the Fortec Lifetime Ultra and the Satwork 3688 and would like your opinion on which receiver produces a better picture and which one has better weak signal strength. These are my two primary concerns. I understand that the Satwork does not have AC3 output or the USALS feature, whereas the Fortec does. Are there any other important features I am missing?

Are there any other receivers I should consider? I was looking to spend up to $250 for the receiver alone. Any other members please feel free to chime in with your opinions.

Much thanks

Thanks, PSB

The link helped a lot. I would like to know if anyone here has tried to use a Stab motor on a 1 meter dish, and if they had good results. I've heard mixed reviews about the Stab so I am leaning towards the SG2100 but I don't want to count the Stab out just yet. If anyone with the Winegard 1 meter dish has experience with either of these motors, I would be grateful if you would give me your opinions.