Whole Home DVR Not Working, How Do I Reset Or What needs to be done?

T

tmiller_hockey

New Member

Original poster

Jan 21, 2011

3

0

Texas

• May 13, 2011

• #1

Hello,

To all you guru's out there, here's the scenario.

Everything working fine, bought a new LED TV and put it in but in the process I had to unplug everything to move it down to the other end of the wall. Now that everything is hooked back up, on my non DVR HD receiver it tells me no networked DVR's found.

I have an SWM box that plugs into my HD DVR.

 

charper1

Bourbon Tester

Supporting Founder

May 18, 2004

18,442

6

I'm Nationwide

• May 13, 2011

• #2

can you do a full reset and setup again?

 

B

BobStokesbary

SatelliteGuys Pro

Jul 9, 2009

514

5

Southern California

• May 14, 2011

• #3

I would try the procedure mentioned in post 8 of this thread. If it does not work come back and tell us that it did not work and others will give you some other ideas. But, I would strongly suggest that you do this procedure first.

 

Claude Greiner

SatelliteGuys Master

Supporting Founder

Sep 8, 2003

13,213

3,776

Detroit - The Paris of the Midwest

• May 14, 2011

• #4

I would unplug everything, then plug in the power inserter for the SWM and then go around and plug in each receiver.

Also, I had this same issue at my house right after I installed a new receiver. Make sure your receiver has the latest version of software or it will not detect the network.

 

larry55

SatelliteGuys Pro

Pub Member / Supporter

Cutting Edge

Jan 15, 2009

1,234

139

dothan al

• May 14, 2011

• #5

go to setup and do a reset.

 

B

Blktaws6

SatelliteGuys Family

Mar 31, 2011

43

0

Waco, TX

• May 15, 2011

• #6

Did you move around any connections on your switch/splitter?? Make sure your keep the terminators/caps on the ports not in use.

 

charper1

Bourbon Tester

Supporting Founder

May 18, 2004

18,442

6

I'm Nationwide

• May 15, 2011

• #7

... and make sure all power is remove while disconnecting and reconnecting those cables.