Installation of a VIP222K using a 1000.2 Dish

R

RCS71

New Member

Original poster

Jun 5, 2012

3

0

Midwest

• Jun 5, 2012

• #1

Is there somewhere I can get instructions on wiring.
I have a 1000.2 dish with a Proplus triple LNB.
I am not sure what lugs on the LNB to connect the coax to.

Also, I with my 222k i received a splitter that has 3 coax cables that connect to the receiver and one lug to connect the coax from the dish. Does a single wire from the LNB connect to this?

Thanks

 

isaacmorseMI

SatelliteGuys Pro

May 5, 2009

4,734

1

Southwest Michigan

• Jun 5, 2012

• #2

You only need a single line from the LNB.

 

R

RCS71

New Member

Original poster

Jun 5, 2012

3

0

Midwest

• Jun 5, 2012

• #3

If I use 1 coax which of the 4 lugs on the LNB do I connect to? 119 - 110 - 129 - LNB in

 

isaacmorseMI

SatelliteGuys Pro

May 5, 2009

4,734

1

Southwest Michigan

• Jun 5, 2012

• #4

RCS71 said:

If I use 1 coax which of the 4 lugs on the LNB do I connect to? 119 - 110 - 129 - LNB in

Click to expand...

Either 110,119, or 129. Doesn't matter which unless you are using a external switch.

 

R

RCS71

New Member

Original poster

Jun 5, 2012

3

0

Midwest

• Jun 5, 2012

• #5

I am not using a switch.

Thanks, I will try to connect to 119 and see what happens.

 

isaacmorseMI

SatelliteGuys Pro

May 5, 2009

4,734

1

Southwest Michigan

• Jun 5, 2012

• #6

RCS71 said:

I am not using a switch.

Thanks, I will try to connect to 119 and see what happens.

Click to expand...

You have a DPP separator as well, right?

 

papalittle

SatelliteGuys Pro

Aug 19, 2005

1,375

1

Some old corn field, United States

• Jun 5, 2012

• #7

That "splitter" looking thing is a separator and you need to use that at the back of the receiver. The two short cables connect at the sat in ports and the cable from the dish connect to the single port on the separator. Be sure to run a switch test.