Anyone have a dp plus triplexer 175284 wiring diagram?

T

thfoley2

Member

Original poster

Jan 12, 2006

9

0

• Sep 14, 2011

• #1

I would love to get a copy of the Dish pro triplexor 175284 wiring diagram.  I just had a new Dish 1000.4 installed using the Dish pro triplexor 175284 and I want to keep a diagram for reference.  I have looked online for wiring information already.

Thank you for your time and cooperation,

Thomas Foley





Sent from my iPad
Tj14foley

 

Y

yales

Member

Jul 20, 2011

14

0

midwest

• Sep 14, 2011

• #2

Look here:
"www.satelliteguys.us/dish-network-technical-discussions/205354-new-dish-tri-plexor.html"

 

MattG@DISH

SatelliteGuys Pro

Dec 30, 2010

3,871

243

Denver, Colorado

• Sep 14, 2011

• #3

 

Dishman1978

SatelliteGuys Pro

Jul 31, 2010

3,274

90

California

• Sep 14, 2011

• #4

MattG@ DISH NETWORK said:

<img src="http://www.satelliteguys.us/attachment.php?attachmentid=69655"/>

Click to expand...

Nice pic. But if you look closely, and since i install these all the time. If someone wanted to be anal, which i do, the sat port1 and sat port 2 on the triplexer are going to the wrong sat ports on the reciever.

So if one was to follow this diagram exatly they would have the ports on the triplexer going to the opposite sat ports.

Just an observation.

 

MattG@DISH

SatelliteGuys Pro

Dec 30, 2010

3,871

243

Denver, Colorado

• Sep 14, 2011

• #5

Dishman1978 said:

Nice pic. But if you look closely, and since i install these all the time. If someone wanted to be anal, which i do, the sat port1 and sat port 2 on the triplexer are going to the wrong sat ports on the reciever.

So if one was to follow this diagram exatly they would have the ports on the triplexer going to the opposite sat ports.

Just an observation.

Click to expand...

You're right

 

S

sdrracing

New Member

Mar 2, 2014

2

0

Enumclaw

• Mar 2, 2014

• #6

Hi, I have two dual tuner receivers hooked up like the diagram that MattG posted. I want to add another room. Do I use a splitter off one of the Diplexers in the attic? Or how can I use a DP311 solo receiver in this room? Thanks

 

JSheridan

SatelliteGuys Master

Lifetime Supporter

Feb 16, 2008

8,899

10,028

USA

• Mar 2, 2014

• #7

sdrracing said:

Hi, I have two dual tuner receivers hooked up like the diagram that MattG posted. I want to add another room. Do I use a splitter off one of the Diplexers in the attic? Or how can I use a DP311 solo receiver in this room? Thanks

Click to expand...

You can run a wire directly from the dish LNB to the new 311.

 

iwannarock1

SatelliteGuys Pro

Oct 18, 2007

443

11

Stern nation

• Mar 2, 2014

• #8

But if install these, you know it doesn't matter. I've gone to a couple movers where the cust hooked up separators upside down, and they're working just fine. No need to split hairs.

 

dvrexpander

SatelliteGuys Master

Aug 23, 2009

5,030

322

Near a tree

• Mar 3, 2014

• #9

JSheridan said:

You can run a wire directly from the dish LNB to the new 311.

Click to expand...

Yes a new line RG6 needs to be run from the LNB of the Dish to the 311 - you can't split signals from one port no matter how much I wish you could.

 

S

sdrracing

New Member

Mar 2, 2014

2

0

Enumclaw

• Mar 3, 2014

• #10

Thanks I will do that. The installer only ran two RG6's from the dish. Thanks again for help

 

dvrexpander

SatelliteGuys Master

Aug 23, 2009

5,030

322

Near a tree

• Mar 4, 2014

• #11

sdrracing said:

Thanks I will do that. The installer only ran two RG6's from the dish. Thanks again for help

Click to expand...

Standard install if that is all that is needed to cut down on expenses. Issue for future proofing is now being had cause of newer cable requirements such as for the Hopper. Direct has figured out how to use a single line but Dish is way behind on this.