Search results for query: *

Do a Hard reboot then Run check switch test. (menu,6,1,1) if you have 110,119 & 129 everything should be okay

Run check switch test. Press menu 6,1,1 . that should tell you if are still receiving proper signal

even though you have a lines preran to every room you still need lines ran from the dish to the Central.

If you have and On Q panel ( Central for cables ) make sure the builder run at lease 4 lines from the location that you would like to have the dish ( clear line of sight ) to the location where your On Q panel is. that way when the installer comes all he has to do is tap into the lines that was...

Basically since you are upgrading receivers to 612,622 and having a Switch installed it's just better for them to send out a tech and have them start fresh. No headache for you just an upgrade fee

They have alot of problems with the 508 510 hard drive. Upgrade to newer DVR system. Ask for the Dish-n-Up Program

Seems like you been a long time D*sh customer. You should just upgrade to a 722 and have the tech take care of the dish situation. Ask for the D*sh-n-Up Program

you can try swapping the 311 to the 722 location just to test it out. If you still have the same problem with the 311 after the check switch test that mean the 311 might be bad. If the check switch test come out good that mean there is a problem with that location ( fittings, barrels, switch...

Ebay

Also what type of receivers and equipment are you currently using???

61.5 is just as good as 129. as long as the 110,119 & 61.5 are tide in together you don't need the 129. to find out if they are tide together run a check switch test. ( Press menu, 6,1,1) run that test and that will tell you witch orbit is connected.

He's right. you should probably have it inspected if you are unsure. but if it is in healthy condition, brick is a nice solid location.

by the way make sure the Diplexors are Hollands STVC or DPD2 because they are higher freq

Ebay

brick is strong enough. We have lead anchor that we use for bricks and cinder blocks. also if he doesnt have lead anchors he can predrill with a smaller bit than the lags he's using and shoot the lag bolt in the predrilled holes

I am a Dish installer. the 500+ is a 1000+. the only thing different is that the 1000+ has a additional dual LNB on the left side of the 500+ LNB. a pole mount is recommended or a roof mount, but if you have to put it on the chimney it should be strong enough. unless the chimney itself isn't...