Search results for query: *

I was going to ask the same question, but I want an FTA receiver that has an ATSC input. I want to watch PBS at 125W as well as several OTA channels. My Pansat 9200 HD works well but they're getting harder to get. My next FTA receiver is for my second HDTV which has a lousy ATSC tuner. The X2...

I bought an Avenger PLL322S-2 to replace my Invacom QPH-031. I tested it on SES-2 (87W) I found zero difference in quality. Anyways, it was a whole lot cheaper than my Invacom so it still gets a hearty recommendation from me. J

On the day I had it working there was no pixellation at all. It was also very dreary outside. The problem doesn't seem to be weather-dependent. I go up on the roof to adjust, the receiver will still read S:25, Q:25 no matter how much I tweak the dish. I do have a 120cm dish that I am itching to...

I am having a devil of a time getting PBS channels on 125W and I cannot figure out the cause so I am not sure where to even post this question. Since I only have a 30" dish I am only trying to get the 12180 MHz transponder. I actually had it set up nicely for a day and was watching 8 channels...

Hi norman881. It is a small world. I live in Morgantown but work brings me to Wheeling so I drive by Claysville 3x/week. I guess every truck stop has a life cycle. John

I just bought a used Andrew 1.2m dish for $99 from a truck stop owner who was going out of business in Claysville, Pa. It looks to be in good shape except for the bird poop. Anyways, it came with a 2-7/8" mast which was bolted onto a trestle. So, I do not have a base to insert the mast into or...

This thread has inspired me. I just bought a used Andrew 1.2m dish for $99 from a truck stop owner who was going out of business in Claysville, Pa. It looks to be in good shape except for the bird poop. I will start off trying to pick up C band transponders. I know 4ft isn't enough really but I...

Yes the tree is quite flexible. It is also quite mature so it won't be growing much more.

Hi, I have a highly-directional UHF antenna (Antennas Direct 91XG) mounted on a 10' mast. The coaxial cable is already grounded but the mast is not. I would like to run a ground wire from the mast to the ground. There is a large spruce tree right next to the antenna so it would be very...

I am glad to hear that. I am trying to get a used 6ft dish so that I can point it to SES-2, as well. Many posters have planted doubts in my head over whether a 6ft dish is large enough to get SES-2. My yard is not big enough for a 10ft dish or even an 8ft dish. I'd be interested in knowing...

I drive to work through southeastern Pa. and I always notice a 6ft mesh C-band dish in a pasture that I pass by. I have been thinking about approaching the farmer who owns it to see if he is using it. My question is this: "does rust hurt the performance of a C band mesh dish?" This dish is a...

I e-mailed them a few weeks ago and they said they won't carry it anymore. J

I ran into your reply while researching C band dishes. I have had a Ku band dish for many years now. What drew me to C band was the possibility of getting network programming on SES 2 (87W). Now that you mentioned Galaxy 16 (99W), that opens up another option. <Anybody here miss Galaxy 10R?>...

Thank you for your response. 7 feet is a little too big for my situation. I thought I could get away with a smaller dish because when I look at the footprint for SES 2 (87W) at lyngsat-maps http://www.lyngsat-maps.com/footprints/SES-2-North-America-C.html northern W.Va appears at to receive...

I am in North Central W.Va. I have been watching Ku-band satellite programming with my Pansat 9200HD. It usually works well. I have been thinking of getting a 2nd larger C-band dish with a C-band LNBF. I would start by pointing at SES 2 and watching some of the programming on TP 15--it almost...

Thanks Thanks to everybody for clearing that up.

I should add that I recently sent my Pansat 9200HD to Panarex Electronics in Sun Valley, California to get fixed. There had been a power surge and my power supply's PCB was shot. It took 5 weeks but they only charged $40 to fix it. In addition, at my request, they upgraded the firmware and the...

I have a Pansat 9200 HD receiver that I use with the Invacom QPH-031 LNBF. The QPH-031 has linear and circular outputs. I have only used the linear outputs until today. I tried for the first time to access Echostar 10/11 at 110W. There are some free channels there. I pointed the dish to the...

Yes! I can add satellites and frequencies but I thought a firmware upgrade would come with an updated list of satellites and frequencies. Am I wrong about this? I learned after buying it that it was a hack box. I didn't suspect because I thought hack boxes were always low end and this receiver...

Hi, I am not new to FTA satellite but today was the first time that I ever tried to upgrade the firmware of my Nfusion Nuvenio NV HD receiver. I followed the instructions (1) copying the .bin file to a USB drive (2) plugging into the front of my receiver (3) turning on and fumbling with...

My favorite satellite has become AMC-21 at 125W--ever since the Galaxy 18 offerings at 123W shrunk down to nothing. The problem is that I am only getting 3 channels on AMC-21. According to the list at FTAList.com - AMC 21 Channel List I should be getting the following: Create TV 12180-V 30000...

Spec Sheets Understating Features Oops! I'll confess that all of my comments and conclusions were based on spec sheets. The spec sheets for the Diamond 9000 HD and the Coolsat 8000 HD state "Dolby digital audio output (S/PDIF) S-Video" or "Dolby Digital(AC3) 5.1 Channel Surround Sound...

Decoding it? or Just Passing it Through? Thank you for your response. When you say "doing Dolby" you and Iceberg mean merely passing it through. Yes? To others, "doing Dolby" implies the actual decoding of Dolby audio which the Coolsat 8000 does not do. Personally, I needed an FTA...

Doing Dolby? HD does not mean that the receiver decodes Dolby but I think that all high-end receivers will pass Dolby audio on to another device. After doing a fair amount of research I know of only two HD receivers that actually decode Dolby audio: the (1) Pansat 9200HD and the (2) nfusion...