Search results for query: *

I was wondering if the receiver i am using not showing accurate quality because when I used Super Buddy ( a darn nice meter) Q is at 80-85 % but when I check the quality on the receiver it shows around Q 60-62 %. There is no switched involved straight from LNB to the receiver. Can anyone...

Unfortunately the person iIam installing Fta for does not want extra holes in the wall. So your saying it should be Splitter->Diplexer> Diplexer>TV is that correct order? Yes the cable company is running digital service and cable broadband.

I was wondering how do i go about using the existing line that runs into the house at cable box? Currently its fed into 3 rooms with splitter into the house how do i go about using diplexers so I can share cable company line with satellite? The splitter is setup outside at cable box. Thanks Bash

I used red egde on one side. I might have it leveled. When I try to plumb or level i use the top of pole and check that way. Maybe i am not checking or installing the intial setup properly from the start. When i used Super Sat Buddy the max is 25-40 depending the TP but i know i can get...

Well, When i first installed it was plumb but that could change maybe when i put the dish on the pole. So that can cause it interesting thanks. Winegard 30"

I have setup galaxy 19 i took data from dishpointer and the elevation i was given was 38.6 for my location but i found the sat at 45 degree elevation is there something wrong here?? The house sits on a little hill would that make difference. I thought those numbers given are close to what you...

Stupid question :D can you control 2 tvs with one remote or you need 2 remote?

hmmm my receiver with this engine will make my satellite complete :) ViVA Sadoun :) ! Bash

Thx Lak7 That helped a lot u da man :)

I bought Sat Super Buddy online when I received today it only has DTV as option cant seem to find Galaxy 19 or other that i am interested setting up. Any help would be appreciated. Thanks Bash

Thank you all for the helpful informations. I did get it to work as you guys suggested. Funny thing is that all cilrcualr sat comes with 10750 and not 11250 kinda of weird. I used disqec 1.0 instead of chieta 2.0 not sure if that had anything do with it. I had bypass switch and directly to...

I can get circular sat but cant seem to get linear but when i hook the LNB without the switch or just hook linear Sat from LNB to the switch it works fine. The receiver I got is Viewsat ultra. "Replace the switch with a barrel connector. Try a Circular Sat, then a Linear." Lak7 I am confused...

Thanks for the responds, I hooked another switch same problems try different inputs seem one or other works. Somehow in receiver menu the signal all jumpy and doesn't seem to lock on the satellite but without switch its locks weird. my Setup is reciever -s2100-switch 1.0-LNBF. Chieta was the...

I have a question I cant seem to get my 4x1 diseqc switch to work with 2 inputs coming from my LNBF. The diseqc will work with just one coaxial run from the lNBF but as soon i hook up 2 coaxial lines into the switch the quailty bar gets jumpy and won't show which satillte i am lock. My LNBF...

Ok call me cheap but i been using kitchen utensils :) definitely can use this Tool Kit Good luck to everyone and thank You Sadoun

Ok the manual shows declination of 30-6.7=23.3 that would be my Dish Elevation? But when i use program B.J. has recommended i get the following Declination = 11° 46' W so I should have my sat 30-11.46= 18.54 is that sound about right?

Radar you got a lot patient man i am glad you are around to help people like myself. Unfortunately i could not track my true south or arc with the Sun because i work during those hours but i had some success finding all or most of C band satellite except KU like 97W and 123W. Well, I found...

My Question is when i am using compass it should aiming at 87.8 for true south?? The more I read about this stuff the confusing it gets and it has nothing do with you guys :) I have in my receiver setup 40.3N and 76W or i should have 87.8 instead?? What number i should be looking at when...

North Latitude: 40.3128 West Longitude: 76.0242 True Azimuth: 76.02 Magn. Azimuth: 87.8...

I try to align my dish but every time i move my dish to 97W i get 110w that is after some fine tuning using USAL . It seems my information might be wrong. The Lat is 40 and Long 76 according to dishpointer is that sound about right? My lat and long could be wrong. I cant seem to get signal...

Well since it was so nice today i started " a pole in the ground and anchoring it with concrete is the best method." I wrote down the materials i needed and headed to my local hardware store. I installed pole with concrete and checked if was it plumb every few secs and came out nice so far. I...

Here is what you do: Use serial cable that came with receiver cable (not USB). 1. Turn the receiver off from the back 2.Hook the cables from pc to the receiver that came with receiver. 3. Go to official viewsat website get latest VS factory file for your receiver if you don't have it yet. 4...

i got signal but its like jumpy quality or flashing goes from 0-40% I used the following TPs: 12177 V 23000 or 12152 H 20000 as was posted by ICE in this forum the LNBF is Invacom QPH-031 and i tried both Linear output with and without DiSeq switch. As I am posting this I a just found...

i got signal but its like jumpy quality or flashing goes from 0-40% I used the following TPs: 12177 V 23000 or 12152 H 20000 as was posted by ICE in this forum the LNBF is Invacom QPH-031 and i tried both Linear output with and without DiSeq switch.

Thank you guys for all the tips and tricks. After I used leveler my sat pole which the motor and dish sitting on is off. I checked the plumb before I installed dish and than after the motor was installed. When i stalled dish somehow the plumb was off but I forgot about this process. After...