Search results for query: *

At camper, dish is on an old large tree - for 4 years now. The 101 signals are still in the 90's but the HD signals are now mostly in the 60's when they were in the 70's and 80's couple of years back. Any suggestions regarding how to TWEAK the dish to recapture better HD signals ?

I have the setup shown in the pic. I have the signal for the powered A/V Amplifier going to an old non-HD small TV in the kitchen. It works ONLY IF the HDTV at the amplifier is TURNED ON. If I turn that TV off, and the Directv controller remains on, then all I get is a BLANK screen on the...

I have searched the forum and found many posts regarding the non-functioning of the the Caller ID/Call log. I have a H24-100 and it works fine for the Caller ID. I also have a H25-100 and the Caller ID setup looks exactly the SAME. The option is there just like on the H24. YET, it simply...

I keep getting Charter/Spectrum cable service reps BANGING on my door! I have patiently told them before that I CANNOT change my Directv service BECAUSE I use it at both my home AND camper - and THEY have no comparable service! My question to you experts is: do you ever see Directv somehow...

Having a bit of a snafu. Trying to connect an H24-100 to a Sanyo SDTV. The Directv box has no S-Video, only AV and HDMI. I have tried the AV hookup but am getting no signal - just a 'snow' screen. The TV has only a few settings and it is set to receive signal from Cable. I believe this...

Have 2 HD boxes. Signal looks strong (On SWM). If I go to a music channel (e.g., 802) on main TV, the music annoyingly "SKIPS". The same music on the 2nd TV (at the same time) does NOT skip. The sound from the 2nd TV is directly from the TV. The sound on the main TV is from an attached...

I have a SWM 5 setup with one H24-700 (working fine) and one d12-100. The SD box needs either a reset/restart from the menu OR pull of power plug EACH day, even tho power and box remain on overnight. The sd box has both an av and s-video connection. Sometimes, it takes an entire SYSTEM...

Brought my SD and HD receiver up to camper. Hd works fine, can't get d12-100 to work, although I am getting some 101 signals with S-video connection to tv and that is selected on the TV. I have a true SWM 5 setup, and it worked last year for the SD, but ....

Getting "cannot detect SWM signal" on the HD box - as I tried the reset. This happened after lost camper power for a few minutes. Nothing else was touched.

What's on HD 103 ca vs. HD 103 cb vs. HD 99 ca vs. HD 99 cb? I believe the 99 s and the 103 s are for HD locals. My location is Green Bay, WI

I have SWM set up with a H24 and a D12. When I check signal strengths on the D12, I see that a "SWM" satellite signal reading comes up. Is there any significance to that reading of signal strengths?

I have the reduced size BAU and it's on a tree 100' away from camper. I have the Directv splitter installed under the camper. Camper has 2 satellite in plugs on outside. My question is where to ground? I have an 8' half inch copper rod which I could drive in either by the tree or next to...

Had a good camper (PineGrove, WI) setup (signals in the 90's) of my phase-3 dish. Just dropped the slimline with 5ln swm onto the good anchored mast. Have all of the proper SWM HD "adapters" in-line as well. However, cannot get any 101 signals at all ??? I have no specials meters other than...

At camper I have one long run (100') from a tree mounted dish. I plan to just split the signal right before connecting to Sat1 and Sat2 (both "home-runs inside - to bedroom and living room) located outside camper. Originally, I now have a just an oval dish and will use that for a few weeks...

Does anyone know what is going on with the ATT/Directv contract changes (new policy/charges/crackdown?) regarding the moving of a home receiver to a secondary/summer location?

I have one long cable running from the dish on a tree to the pre-wired satellite system input on the outside of the camper Satellite connection, and into the controller located at the camper living room (working fine). I have Directv working on that 1 controller I have there now. If I put a...

New camper is pre-wired for satellite. From my dish it connects into the outside of the camper. I have the Directv box set in the front room and get the signal on that TV. Other than splitting/running a cable from that Directv box over to the TV in the bedroom, OR buying another Directv...

Last September at Camper near Leopolis, WI was able to get 119 and 101 This Spring, lost my 119, so kinda starting all OVER AGAIN, and messin' around all over again!. Right now, I have a 60 signal on 2 of the 3 110s, and 89->99 on the 101s, but all 0's on 119 ... I actually pulled down a...

At camper, was getting 101 and 119 fine on Saturday, then on Sunday, nothing at all on 119 (Green Bay Locals went to all zeroes). Nothing visually changed outside. Is there some kind of an explanation for this?

Using 211/35/70 per the setup prompt. Getting high 90's for 101 with both odd and even checked. But, getting 0's on 119 and red X for odd and even on system test. Am I out of luck or is there hope or anything I can still try to get the locals too?

Trying to replace an 18 round with a 3LNB Oval Phase III 20LNBR1-03. Originally, D12 box said I had a slimline 5 - which was not an issue with the 18 round which was working fine. However, I could not get a single with the Oval, and I tried to see what 'settings' may be different, so I tried...

This in only my my Hughes box, not the other two. This box is at my camper and has worked fine for 5 years now.

I just talked with DirecTV Tech Support and they did not help. Once I told them I was on the MagicJack PLUS, they started using that for the reason! Yet, I used all the old land line phone lines which went to each controller box, and re-routed the AT&T end of those line over the Magicjack on...

Is that also going to work on the receiver I bring to my camper?

3years ago at my camper I LUCKED out and got an almost 90% signal on 101 with my round dish. Today I pulled it down and tried to install the ka/ku dish in exact same orientation but cannot get an autoconfig to take at all now ...... ;-(