Search results for query: *

  1. S

    Galaxy 19, Transponder 11898 V 22000

    Thank you for the advise. My dish is clean.
  2. S

    Galaxy 19, Transponder 11898 V 22000

    Yes, I will fine tune the dish and adjust LNB when the Sarnia weather is warmer. Thank you to all of you for advise.
  3. S

    Galaxy 19, Transponder 11898 V 22000

    The followings are previous transponders that are not good anymore: 11874, 12060, 12090, 11789, 11836, 11867, 11808, 11997, 12022, 12177, 11912, 11998, 12029 and 11961 MHz. The following are good transponders from my last Detailed Blind Scan: 11842, 11936, 11966, 12122, 12152, 11929, 12053...
  4. S

    Galaxy 19, Transponder 11898 V 22000

    Yesterday night, the detailed blind scan helps to bring back all channels. It works like before now. As I still have the list of previous transponders in my Satlink, I will check and compare blind scan transponders with previous transponders. Look like only one of them unchanged while all other...
  5. S

    Galaxy 19, Transponder 11898 V 22000

    I drilled a hole through the disk holder when the disk was well aligned. This hole is drilled trough the up/down plate, left/right holder and the stand pipe. The holes of the plate, holder and stand pipe are still well aligned. I did try to find better new position by moving the disk around...
  6. S

    Galaxy 19, Transponder 11898 V 22000

    No Signal on Galaxy 19 I have no signal on Galaxy 19 several days ago. I am in Ontario Canada. Yesterday, I came out to check my 36" satelite disk using my Satlink (electronic satelite finder). Autoscan of Satlink found 13 TV channel at the current position of the disk. No improvment by moving...
  7. S

    Looking for an affordable S2 Meter

    I bought Satlink WS6906 last year (see link below) and use it many times for myself and friends. It's work quite good and reliable. When it locks to your satellite, you can watch the channel you like on it screen like a TV. http://www.ebay.com/sch/i.html?_nkw=satlink+ws+6906 Somme little...
  8. S

    MicroHD - Pre-programmed recordings failed

    rv1pop, You are right. My program settings are at "channel"!!! I discovered this yesterday night and changed them all to "record". Every things work fine after that. Satellite RV, I did my manual firmware update succesfully following your instruction. I got a little difficulty to do it as my...
  9. S

    MicroHD - Pre-programmed recordings failed

    I alway shut the unit off by unplugging the power cable for 20 seconds. I did shut the unit off and restart it then did a factory reset, reinstall satellite and all channel. After that I did shut the unit again and set all 6 preprogrammed settings. These setting are 58 minutes Daily for the...
  10. S

    MicroHD - Pre-programmed recordings failed

    Yesterday, I tried to use my USB 32 Gi Memory Stick in place of hard drive. MicroHD does not record any preprogrammed settings!!! Like the hard drive, I can manually record a broadcast. So the problem is of the MicroHD. May be the new firmware will help. I will try to manually updates firmware...
  11. S

    MicroHD - Pre-programmed recordings failed

    I will try Memory stick. Yes, I tried twice to disconnect the power source for 20 secondes and also tried to perform a factory reset but failed many times to run manual update via satellite. The drive is a WD 500 Gi Passeport (pocket size) that does not have 2nd USB connection. This drive...
  12. S

    MicroHD - Pre-programmed recordings failed

    Yes, I always set the clock to GMT off and set date and time manually. I reformat the drive with my computer. The MicroHD can record when I press the RECORD button but refuse to record on the pre-programmed setting. I did try to format the drive with MicroHD but cannot find this command. I...
  13. S

    MicroHD - Pre-programmed recordings failed

    I am using a new MicroDH for many months for recording broadcasts to my 500Gi hard drive without any problem. Note that I always left MicroDH on 24/24. The box was set for monthly auto updating firmware. Yesterday, the box did not able to connect to my USB hard drive (only a green light is on)...
  14. S

    GEOSATpro How to setup microHD to automatically record broadcasts

    Yes, I do turn it off and on. So I will let it on all the time then. Thank you very much.
  15. S

    GEOSATpro How to setup microHD to automatically record broadcasts

    Set GMT to OFF gives clock error every day thus I have to set the recording timer to 5 minutes in advance and come back to change the time every week. Otherwise I will miss the beginning of the recorded transmissions!!! I hope that the new firmware will correct this problem.
  16. S

    GEOSATpro How to setup microHD to automatically record broadcasts

    Satelite Av, Thank you for your reply. - VTV 4 is on transponder 11966H tp14 - I first select to watch VTV 4 then go to DVR timer. This way, VTV 4 is already displaying in the timer. Then set timer as in my previous message. - I did set Local time to GMT - On - I did tried to manually update...
  17. S

    GEOSATpro How to setup microHD to automatically record broadcasts

    Yesterday, I got my new MicroHD. Setup of this machine is OK but the machine does not record any of my preprogrammed EPG setting! It's record well when I do it manually. As an example: Timer mode: daily Timer service: record Channel: VTV4 Date: 4/23/2013 Start time: 10:00 PM Duration: 00:48...
  18. S

    HDTV approved

    Someone said that the new generation Geostat MicroHD will be on sale in a month. Is it true? Any ideal about the cost of this new divice?
  19. S

    Review of Pansat 9500HDX

    As my Pansat 9500 is frozen many times a week and clock has to be reset manually every time, many broadcasts cannot be recorded as they should be. I am now removed it and use my old Coolsat 7000, even Coolsat 7000 does not have HD and HDMI. I am now looking for a new reliable HD receiver. Could...
  20. S

    Review of Pansat 9500HDX

    Could you please show me how to keep the Pansat 9500 to always ON? Regards.
  21. S

    Review of Pansat 9500HDX

    I cannot find anything look like "inactivity timer"! What is OSD? Could it be the inactivity timer? Please advice. Regards.
  22. S

    Review of Pansat 9500HDX

    Sorry, my computer was crashed thus I cannot come to this site. Today it's OK. Yes, my receiver turn OFF or standby by itself and ON when it starts to record. I do not know how to keep it ON all the time! I will look for "inactivity timer" setting to turn it OFF. I do not understand RTV, AAC...
  23. S

    Review of Pansat 9500HDX

    As I turned OFF the GMT time setting in the menu, and set it to local time, my preprogrammed recording works quite well. But this local time gives an error of around 1 minutes/day so I keep reset the time every few days otherwise the recording times will be wrong as my machine time is off. In...
  24. S

    Review of Pansat 9500HDX

    I turned OFF the GMT time yesterday and it works very well now. Thank a lot.:excited:
  25. S

    Review of Pansat 9500HDX

    I tried to set timed recording: All 8 timed recordings are set to DAILY for 8 records with today or tomorrow dates. After a record, time should be changed automatically to the next day. Pansat 9500 changes recording date irregularly and unpredictible for the whole 8 settings from a few days to...