Search results for query: *

There are none manufactured or easily available in North America, but there are sources overseas. You will find a lot of information about FM DX antennas on the website of the World TV-FM DX Association (Worldwide TV-FM DX Association), particularly in their antenna forum (The Antenna Forum)...

Yes, do you have questions? Sent from my LG-H812 using Tapatalk

Would you not have to ensure the Diseqc 1.1 command is sent first to 'open' port 5 before the Diseqc 1.0 command is sent, otherwise there's no way for the 1.0 command to reach its destination? I have successfully cascaded comitted and uncommited switches and vice-versa, using both a MicroHD...

Simple way is to ensure you are tuned to a horizontal transponder before you move the dish - that way the motor's being supplied with 18 volts, instead of 13 volts (as it would be if you were last tuned to a vertical transponder). I had an HH120 installed, but eventually got fed up with its...

Just contact Titanium. The owner Brian provides excellent support for his customers (speaking from personal experience with my ASC1, and others who have posted here).

Like Cham, I use EBSPro with its app on an Android phone, connected by wi-fi. One of the great things about the app is that it can speak the signal-to-noise ratio (to 0.1 dB precision), so you don't even have to look at the screen. This leaves both hands free to make adjustments. Furthermore...

An alternative to getting shorter U-bolts would be to put a few washers under each U-bolt nut to provide a few extra threads to snug the nuts down. Sent from my SGH-I747M using Tapatalk

Can you tell us who your supplier was? They seem hard to find.

Thanks, Magic. So you're saying the lower cam can't be adjusted? I didn't dismantle it very far. As soon as I got the backplate off, I saw it was stuffed full of new-looking grease, so I didn't need to add any. I just replaced the backplate - I didn't touch the ACME nut (if I understand the...

Hi, I have a used Von Weise actuator that I took apart to grease, and it appears that when I reassembled the end plate, the limit switch gear wheel did not get meshed with its mate in the same position as before. The result is that the tube now retracts too far (i.e. the limit switch isn't being...

This sounds a lot kike the effects that multipath interference can produce. You really need to see the waveform on a spectrum analyser to positively identify that as the cause. A good signal has a flat top to the waveform; multipath produces troughs and peaks (a bit like the Rockies!). I've...

I want to win a Dr. HD Advanced Satellite Meter Thanks to Brian and Dr. HD for a generous contest!

The licence fee doesn't apply to just TV - you are legally obliged to pay it if you stream BBC to a computer. Given the quality programming that the BBC produce, many consider it good value!

I want to win the ASC1 and a C1-PLL ... to replace my V-box that has gone flakey.

Working for me again, too (Android).

Not working for me, either. Refused to recognize my log-in credentials.

A few comments: I do like the way that when you drag the spectrum left or right, the tuning stays on the selected frequency. (SDR# does not do this, and that's annoying, although I can see that it's a way to tune to another frequency, but my preference is to enter the frequency directly.) I...

I've tried it on a W7 Ultimate 64-bit i3 machine with an AirSpy and an RTL-SDR, just on the FM band so far. Works well, but with one or two glitches. Would you like bug reports by PM or here in the thread?

I'll second that. My HH120 has been moving a heavy 1.2 m Channel Master dish for three years now through Canadian winters without issues.

The shaft on the Stab HH90 points down; the shaft on the larger Stab HH120 points up (I have both).

Yes, although I would use the S/N figure, not the quality figure. It is a lot more stable and responds to very small changes in alignment. If you use the Android mobile app, it will speak the S/N ratio out loud so you can have both hands free for adjustments.

I have used both RTLSDR Scanner and RTL Panorama (wide-range scanners) with RTL-SDR sticks, and both perform reasonably well, Panorama being rather faster than Scanner (Panorama is a GUI for RTL Power). I therefore think you should pursue swept-spectrum with the cheap sticks. I must say using...

Are you implementing just FFT spectrum (like SDR#), or swept spectrum display (like Spectrum Spy)? For either, a trigger mask that could be set so that if the amplitude of a given (defined) frequency band exceeds a (specified) threshold, an alert or notification is created (e.g. an email is...

Thanks! I also use SmartDVB: what codec do you use for HEVC?

Cham, What video card do you have? I have a TBS 6983, EBSPro & Pot Player on a moderately fast i3 with a middle-of-the-road graphics card (monitor is only HD), but the display of NASA stutters. If I record with TSRecorder (or whatever it's called in EBSPro), and then play back with Pot Player...