Search results for query: *

Any way to transfer timers between receivers? I'm not worried about moving recordings to a new receiver (I tend to watch and not save), but I've been putting off getting one of my 622's replaced to fix the hdmi output because I don't want to spend the time remembering and recreating all the...

Maybe this is too obvious, but can't you take the TV upstairs to the receiver and plug it straight in with a short piece of coax? That would at least tell you if it's a cabling problem or not.

Does DVR advantage show up differently for you on your bill, or does it say DIGITAL HOME ADVANTAGE?

Talk to technical support instead of account changes. The Tech support people will just solve your problem. The account change CSRs may give you crap like you got. I just went through the same thing and was given the same excuse. I just called up tech support instead and they fixed it with no...

My bill, without taxes, for Dish DVR Advantage w/Top 250, HD, and two 622s: DIGITAL HOME ADVANTAGE AMERICA'S TOP 250 WITH LOCALS 59.99 DISH NETWORK DVR SERVICEFEE 11.96 DISHHD ULTIMATE 20.00 LEASED RECEIVER FEE 7.00 PROGRAMMING ACCESS FEE 5.00 PROGRAMMING ACCESS FEE 5.00...

More were in HD this year than last year, but not as many as they advertise on the NBA league pass site. I'd guess about 60% of the ones listed as HD were actually in HD on E* this last year.

Have you tried the Panasonic remote codes at Tech Portal : (choose receiver model) : Remotes : 5.3 IR ? Or the scan feature?

It might help to know which model remote, which model receiver you have, and especially what model projector you're trying to control. So lacking that, try the scan feature as described at Dish Network Remote Control Guide » CarltonBale.com (random link found via google that quotes the manual).

To somewhat resurrect this thread, instead of starting yet another one, here's the two latest updates: 1. CSTV announces a week ago that they're going to turn into CBS College Sports Network, leading t speculation that since CSTV is one of The MTN's primary owners, popular MWC games will...

The way the NBA league pass games are broadcast, nothing is sent to the receiver until the broadcast actually starts. The splash screen is just from the receiver software. Nothing is sent after the broadcast ends, either. When they first launched the channels, if you accidently recorded one...

One thing no one has addressed is that since your projector and main room tv are right near each other, you could easily use one HD-DVR for both of them as long as you don't mind watching the same thing on both at any given time. The way to do that is to hook up the HDMI output to one of them...

On a somewhat related note, if a fast food place looks slow, order your fries with no salt. That'll force 'em to wait for a new batch that they haven't salted yet to come out of the fryer in order to fill your order. It may take an extra minute or two to get your fries, but they'll be hot and...

At 52" you may not be able to tell a difference. At 100" on a 1080p projector, there is most certainly a noticeable difference. The difference is usually in more digital artifacts due to the extra compression on the bit starved channels.

You'll need an RX9400 and the IR codes for your 622 remote and the remote channel you have the 622 set to. You can't talk to the 622 directly over the IP network because it isn't listening.

Visit the tech portal remote guide and look on the bottom of page three. It shows the exact remotes that work with your receiver, which keys do what, etc...

Watch more CBS News and CNN? :) In all seriousness, this sounds like an adjustment you need to make on your TV. Try your TV manual, look for an online manual, or call the TV maker. You didn't specify the exact model, but it likely has options to both move the picture around and resize it. You...

You can use VOIP (like freeworlddialup, etc...) that allows you to dial out to toll free numbers for free by having broadband and purchasing a VOIP analog phone adapter for $50-80. If you manage to get a 622/722, you can also connect those direct to ethernet and avoid the fee for them. If...

Also check out the DishDVR promotion, for which the channels upgrade and HD both count as "premium" services towards qualifying. Might make it less expensive for you to go that route.

Why would you want to? Just get a 622/722 instead. That'll save you a ton of hassle in actual use.

Mac OS X has a fairly standard FreeBSD userland by default. You can easily install most stuff from the FreeBSD ports tree, as long as you're planning on using it all from the command line. It also comes with a windowed terminal application, so it's not exactly difficult to gain access to the...

Run two cables. Run the component for HD and a second cable off of tv2 for SD to one TV and hdmi/a second SD cable to the other TV. That way you can watch HD most of the time and in the rare cases where you want to watch two different things on the two TVs at the same time, just switch one...

I've been involved with a Teradata installation from the customer end. Based on that experience, horrible customer service decisions and complete lack of "business intelligence" is what I would expect Echostar to get from the product, so apparently they're meeting expectations. With the way...

According to NPS' RV Waiver form (https://www.mydistantnetworks.com/RVDeclaration1-12-07.pdf): "HUD regulations (Title 24 Code of Federal Regulations, Section 3282.8) define "recreational vehicle" as a vehicle that is: (1) built on a single chassis; (2) 400 square feet or less when measured...

So no spot beams in those markets... hmmm..... what other markets have all four HDs in no spot beams? Are the SD locals (for other TVs in the household) also not on spot beams?

It will automatically upconvert it for any of the HD-output capable connections. That doesn't necessarily mean it will upconvert it better than your TV or Receiver would from the S-Video connection, but using strictly HDMI or Component may end up being your best picture choice.