Search results for query: *

I recently purchased coolsat 8000 receiver, It has SW 11170A how do I get it to 2025A. I've ran upgrade 3.01 uploader and downloaded files from here. But I cannot get coolsat 8000 to recognize the upgrade. What is proper sequence? Turn receiver on off at what point? Thanks in advance!

My Azbox Elite AMC 21 PBS Coordinates, It Is Slaved to a coolsat 6000 which controls H/V. I blind scanned feeds. I saved one vert and one horizontal and renamed channels (AMC 21 PBS Vert) and (AMC 21 PBS Horiz). When I want to watch LPB I put on (AMC 21 PBS Horiz) & the OETV, Montana PBS, PBS HD...

I have a stand alone primestar 1 meter wide x 1 meter plus 10 cm tall dish. The lnbf 0.2 top is about at 10 o'clock instead of straight up. I have a stronger signal to my azbox elite when it is slaved to a coolsat 6000 than when it is connected directly. I have a power block switch to keep from...

Looking from the front of the dish I have the top of lnbf at around 10 o'clock (12 o'clock being straight up). I use a 0.3 standard lnbf. Most satellites lnbf is mostly straight up, 12 o'clock. But, since I have a stand alone dish just like yours I thought I would chime in. I receive OETV fine...

H-11843 5/6 22.000 Gal 19 97 degrees (aka T5), channels moved from w4

I use a BSC621 lnb with circular plate removed, 4x DISEqC switch. I also had problems with a common focal point. One post mentioned putting a spacer on ku part to have a closer focal point, another post mentioned ku lnb can turn inside and get off centered. So I removed lnb and looked to modify...

I use a BSC621 lnb with circular plate removed, 4x DISEqC switch. I also had problems with a common focal point. One post mentioned putting a spacer on ku part to have a closer focal point, another post mentioned ku lnb can turn inside and get off centered. So I removed lnb and looked to modify...

What type lnb? Size Dish? If it has dual lnb (pick up sats 4 degrees apart) T5 97 (AMC 19) and W4 101 (AMC 4) would pick up some international, religious channels.

Neusat 9000 will run hot in any cabinet, I had to set outside cabinet by itself. With no other receiver on top. No more issues. Another thing about receiver, It will play ac-3 through audio video, coax. It will play sound on pbs feeds on amc 21. This receiver had several updates, converting to...

This receiver has issues sure, for a cheap price, it works good if you slave it to a Coolsat 5000 or 6000. picks up HD 4:2:0. I scan with coolsat, then enter found coordinates in. Sports feeds in 4:2:0 format, G16 abc hd, AMC 1 ion hd, plays fine, etc.. If you have a tv with several inputs...

Sat lnb to coolsat lnb input then loop out to 2nd receiver. 2nd receiver will see whatever polarity coolsat is seeing. You can then use blindscan on coolsat to find signals. Put coolsat on desired signal, push ok button on coolsat remote. you can see coordinates to enter into second receiver...

Neusat 9000 will not bring in 4.2.2 HD sigmals. But it did pick up 3/4 of college football backhauls this past season

I Have Mine slaved to coolsat 5000, whenever I scan a signal on the coolsat that is widescreen but scrambled I then turn on neusat 9000. This set up also gets pbs HD on amc 21 withsound

I use the Captain 8000 (Converted Neusat 9000) as a slave to a coolsat 5000. Use it to pick up 2:0 hd feeds that the Coolsat can't pick up. No 2:2 though! I use the 2 user sats, one for ku other for c band. I will comment more if requested, as not much info on this receiver.

When you have c-band set, I will reply on what I did as far as ku band is concerned. also I removed plate from lnbf, I don't need it.

Hook directly in back of coolsat while testing. then I would rotate lnbf to seven o'clock position. I use a small tv and coolsat and monitor signal strength as changes are made. Also end of Lnbf is usually closed to even or recessed a little with front of scaler ring.

When I look at my lnbf like yours, the box on the side (c-band connection) is at the 7 o'clock position, yours is at 3 o'clock position. I'm located in Mississippi, using a coolsat 5000. Initially I had to take the tan lnb cover off and replaced with clear cut-off end of a water bottle to...

My apologies to everyone. Man, I don't see how I misread info or receiver. I should have at least caught it was a ku frequency. Anyway 3847 H 15030. And folks say "good help is hard to find".

12175 V 22996 on My Coolsat 6000

A Suggestion would be Install DiSEqC Switches In your weatherproof box, it will avoid splices of coaxial cables. This is something that is needed if a decision to add other dishes, you could then connect them to DiSEqC Switches at your box. I assume you are going to use BUD with FTA Receiver.

You can remove the blue motor and and see if lnb is turning freely inside. What I have done also is turn motor in blue box manually making sure it is not turned all the way in one direction. Then reconnect and check. If nothing else works you can hook up blue motor directly to back of receiver...

If The motor was ever removed from arm and then it was moved, it would cause this problem. Usually G10 is set to 5000 when new install is made. You could remove motor and move to 5000. Then manually move dish to G10 and then reinstall motor. Reset settings making 5000 home for for g10.

I just looked at the picture posted and there is not much movement allowed, probable rotation of dish is only option.

Did you try rotatating LNB itself? From say 12 o'clock to 11 o'clock.

So Captain will pick up feeds where the neusat would not?