Search results for query: *

  1. A

    1 meter dish and dual lnb

    okay it appears to be 2ft 11inches across the center. So I will then see about getting a 1.2m dish and then I could use a dual lnb and a motor on it also?
  2. A

    1 meter dish and dual lnb

    well the size is a guess it might be. I had no idea that sized mattered that much. So if it is a 1.2 meter dish then it would be fine? I will try and find out then. So a dual would be great for a 1.2 meter dish then ?\ and can I hook up a motor like I have on my BUD that moves the dish...
  3. A

    1 meter dish and dual lnb

    I have a small round dish 1 meter and wanted to know if a dual lnb (ku and c band) would work on it and if so what would be recommended and do i need an adapter for the lnb or anything else
  4. A

    FTA? missing channels on the same sat

    hmmm I do that and I get nothing for imaginasian TV and some of the other channels are hit and miss also. I am still trying to get my big dish arced correctly. I can get most of my west sats in and a few are fuzzy. I am sure it has something to do with my problems. On the other hand if I...
  5. A

    FTA? missing channels on the same sat

    would it have something to do with pid? I can't turn pids on with the bob jones receiver and I have to wonder if there are certain things I am limited on with this receiver. I can only enter the SR and and dl freq number I can't enter a vpid or apid number could that be the problem thanks...
  6. A

    FTA? missing channels on the same sat

    is there a reason that I can get some channels in and I can get in an example would be on Galaxy 23 121.0 west I have no problem getting in the following 2 channels TVW washington state the sportsman channel I would like to get in IMAGINASIAN TV and yet I can't get it in Any idea...
  7. A

    some arcing questions

    OK I am getting this and thanks for the help thus far. One more question then. Is the angle I set my dish based on the top of the bar or bottom of the bar in the 1st picture? or is the lnb supposed to meet that angle
  8. A

    some arcing questions

    azimuth true north 213.51 azimuth to magnetic north 211.05 elevation 41.95 slant range 37632.7 polarisation tilt 26.35 polar mount main axis angle 37.18 polar dish mount offset tilt 5.15 I am trying to arc my dish for the first time. I have pictures of the dish that will be posted. I...
  9. A

    what do I need to get my c band dish and receiver to get Ku band

    thanks for the help. it had arrows on the first menu that allowed me to get to the proper setting. I am nowing trying to arc my dish properly :) thanks again for all the help I will keep you posted on how this works :)
  10. A

    what do I need to get my c band dish and receiver to get Ku band

    well I tried to change the lnb to 5150 and it gives me a data error I guess I am going to do some research. it starts out as 10750 I have tried 05150, 51500 it does not seem to work :( in manuel it shows changed but when I try to search I get data error. thans for the help thus far.
  11. A

    what do I need to get my c band dish and receiver to get Ku band

    here is a pic of my menu screen of my mpeg 2 receiver i used to know how to change things around and dork with it to get channles in. Do I need to change the LNB frequency to match a c band lnb If I am correct the reciever was setup to use a ku lnb to get bob jones. Thanks again
  12. A

    what do I need to get my c band dish and receiver to get Ku band

    thanks for your time :) it's an atlanta DTH model number8009 bju rev C s/n bn8002705737 it's a little beat up on the paper but that's what it seems to look like :) At one time we did try and use it to find channels using the small dish it comes with. We did get a few. We got indian...
  13. A

    what do I need to get my c band dish and receiver to get Ku band

    thanks for the quick reply. I have my reciever that I used from Bob Jones when we homeschooled our kids. It states on the front "digital satellite receiver MPEG-2 DVB" Will this work?
  14. A

    what do I need to get my c band dish and receiver to get Ku band

    thanks for all the input :) one last question, I wanted to know if my trx1520 will be able to get all FTA c band channles when arced properly?
  15. A

    what do I need to get my c band dish and receiver to get Ku band

    I hav a trx 1520 and a large mesh dish and I would like to get ku FTA. I have an mpeg 2 reciever that I would use as a slave I have a c band lnb now, do I need to buy just a KU lnb and use some sort of adapater? thanks any help
  16. A

    wiring for trx1520 both to the sat and the actuator arm

    thank you very much I am now up and running and trying to arc the dish :) I just have to get a ku/c band feed horn so I can get the free feeds on my mpeg 2 receiver :)
  17. A

    wiring for trx1520 both to the sat and the actuator arm

    I guess I can't edit the subject of my post. I wanted help hooking up the wires to the back of my sat receiver. I hope there was no confusion here are pics of the back of the receiver and the wires that need to get attached to it. the second pic wires go red white green brown the...
  18. A

    wiring for trx1520 both to the sat and the actuator arm

    This is for the wires going to the back of the reciever I have found one post that kinda helps but my wires are not the basic red white and black colours :( I do have red and white but I also have brown and green I need to know where they go for the actuator arm I have three wires...
  19. A

    ViP 622 & 722 Running Bug Thread

    622 and closed captioning Hello all, I have not read anything on this problem I had my 622 hooked up about two weeks ago and have I have problems with my CC. I had a 510 hooked up on the same TV so I doubt the TV is the problem My CC stopped working on some channels when the 622 was...
Top
Back