Search results for query: *

  • Users: EricS
  • Order by date
  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. E

    Can two dishes interfere?

    Depends on how close your ka/ku is to the tripsat,lol.......it would have to be damn near right on top of it........stream is coming in at 44 degrees, give or take.......
  2. E

    Questions about 5LNB/h20 and multiswitch

    and yes, the line to the r15 will work fine for the H20....rg6 I assume?
  3. E

    Questions about 5LNB/h20 and multiswitch

    If you are only going to have a toatl of 4 lines you don't need any ms at all.........if you go to five or more, you will need a linwell 6x8 your current switch won't work they will provide this for you.........tech will have to bring 2 more lines down from ka/ku wether you need the ms or not...
  4. E

    low signal strengths on 110?

    even though you have good signal on 101 and 119 have you tried tweaking the skew? Are you getting bad rain fade or pixelization? If not don't worry about it!
  5. E

    5LNB Feed to two locations (Same house)

    As I look back at your post you do have the correct ms
  6. E

    5LNB Feed to two locations (Same house)

    The reason for this is it needs 13 and 18 volts standard, and 13 and 18 volts 22khz.......the high def is fed by 22khz..........also you can only use a 6x8 with ka/ku, not standard 4x8........you can put the 6x8 at the dish mount location and then feed your two to one building, and two to the...
  7. E

    Help installing 5 LNB dish for Direct TV

    Actually on the slim line there is no slack in the dither adjustment bolts, and the point of making two rotations as opposed to one, counterclockwise, is to compensate for any play.........the idea is to find a drop point one direction, find the matching drop point the other, and then split the...
  8. E

    Remote Help

    Remote Code Power Scan If your brand is not listed below or if were were not able to get the listed device codes to work properly, use the following procedure to scan through all codes. If/when the remote scan scan reaches the correct code, the device (whether a TV, VCR, or other) will turn ON...
  9. E

    How many receivers on One account ??

    If you run into a problem you can alway add wireless phone jacks...very simple to use.......
  10. E

    Tips for a 5LNB install.

    It would be a good idea to use a sat finder, preferably one that can be set the ber to log format for fine tuning...........ka band requires precise pointing..........get your mast level and plumb, be sure you catch a truss line with your center holes......this is not optional! Also be sure you...
  11. E

    Help installing 5 LNB dish for Direct TV

    It would be a good idea to use a sat finder, preferably one that can be set the ber to log format for fine tuning...........ka band requires precise pointing..........get your mast level and plumb, be sure you catch a truss line with your center holes......this is not optional! Also be sure you...
Top
Back