Search results for query: *

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. WyrTwister

    Testing the waters before juming in

    Are you trying for Spanish language channels ? God bless Wyr
  2. WyrTwister

    Corrotor II Plus ?

    Some of the older Pansats would do skew on a CoRotor and operate a 22 khz switch . Do not know if yours will ? God bless Wyr
  3. WyrTwister

    low quality on my new 1 meter motorized dish

    You HAVE to have The whole dish / motor assembly pointed due geographic south ( not magnetic south ) when the receiver commands the dish to reference point ( due south ) . If you do not have this right , then you will always have problems on some sats , often at the extreme ends of the...
  4. WyrTwister

    LNB/feedhorn Skew

    43 degrees is pretty close to 45 degrees , which you can probably approximate by eyeball . Once you get a signal , you can tweak the skew . If you do not get it on one LNB , power down the receiver , switch to the other LNB , power up the receiver & try again . Or just blind...
  5. WyrTwister

    What happens if I use a 39" dish for C Band?

    A year or two ago & tried a C band feed horn & LNB on a 36" Ku band dish . Analog , a couple channels pretty strong , the rest went down in strength . I scrounged a 10' Dish and played with it for a while . I no longer use it , back to Ku . Wyr
  6. WyrTwister

    U-VERSE DISASTER

    I tried to read this , but with out punctuation , I gave up . :-( Wyr
  7. WyrTwister

    Ultimate newbie trying to hook up a C band Sat receiver

    This is a digital receiver ? Are you shooting for C band ? Ku band ? You can find a user manual at http://www.upfrontfotos.com/downloads/dsr4402x.pdf If you do not have one . Here is the chart for AMC 1 AMC 1 at...
  8. WyrTwister

    How do I upgrade my old big dish?

    You are going to need to use the GI receiver as master ( move the dish & control polarity ) and the DVB receiver as a slave . Since you have C & Ku band on the big dish , get two splitter , each has one port that passes DC ( the GI receiver ) , the other port does not pass DC ( the DVB...
  9. WyrTwister

    First channel you saw when you aimed your first FTA dish?

    Ku - AMC 4 channels , or maybe it was T5 . C band on a 90 CM dish , the 2 religious analog channels on G4 wyr
  10. WyrTwister

    Pricing & fees

    I am presently on 3 mb DSL . What speed is standard with the UVerse package ? Thanks
  11. WyrTwister

    So I bought a Skystar 2

    I think the newer versions of MyTheatre will do USALS ? Blind scan on a SkyStar 2 card ? Wyr
  12. WyrTwister

    Stab motors

    I have a HH100 & have uses it for a few years . Works fine . Wyr
  13. WyrTwister

    Using USALS to find "True South"

    So , AMC 6 is your true south ? If so , enter all the info in the receiver menues & then have the receiver tell the motor to go to AMC 6 . Be sure the scale on the motor - to - pole bracket is set for your latitude . Now , go out & tweek the dish for AMC 6 . Now ...
  14. WyrTwister

    Internet Explorer

    As several people have mentioned , it may be a conectivity problem or an IE problem . Go into Programs -> Accessaries Look for command prompt & click it You will get a DOS window on the screen type in : Ping http://www.satelliteguys.us ( or any other web...
  15. WyrTwister

    Project Primestar success

    Try a Diesque switch or a 22 khz switch ( if your receiver supports it ) to get both polarities ? Wyr
  16. WyrTwister

    Ugh! I think my SG2100 died!

    Are all your coax connectors OK and tight ? Wyr
  17. WyrTwister

    ProagDVB

    I have been using MY for several years . D/l'ed the newest trial version of Proag . It does not seem to want to play well with my Nexus-S ? It finds signal & quality , but will not find any channels when I scan ? No big deal , just curious . Thanks , Wyr
  18. WyrTwister

    USALS and Mytheatre

    I think MT 3.38 supports USALS ? Set it up in the menues . Go to your sat in the sat menue , select all the Trans Ponders and click scan . The first few TP's may come up empty , while the motor is moving the dish . When the dish is positioned , you should start getting...
  19. WyrTwister

    103G stops boot process

    Is this with or w/o the sat coax connected ? Check to see if the card is seated all the way in the slot . Check to see if anything on the card is shorting against anything else . Wyr
  20. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    My old Fortec works fine with USALS . :-) Wyr
  21. WyrTwister

    Receiver boot

    Make sure you do not have a short in the coax cable . Does it re-boot if you remove the sat coax cable ? Wyr
  22. WyrTwister

    USALS and Mytheatre

    Do you have a collection of " ini " files ? If so , import the sat . The sat degrees for the ini files are from the other direction -> AMC 4 101 West will be 2590.ini -> 259 East . If you do not have the ini files , let us know and some one will be glad to email them to you . Wyr
  23. WyrTwister

    Receiver boot

    Try re-loading the factory firmware ? Wyr
  24. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    If you can only get one sat with a moter , w/o re-tweeking the dish , it sounds like the angles are wrong . Is the angle on the motor / pole bracket set to your latatude ? Is the dish and motor both pointing due south when you tell the motor to go to zero / reference position ...
  25. WyrTwister

    Is it possible to setup USALS using a satellite that is 30 degrees away?

    Go to the scrap metal dealers & buy the pipe by the pound . Wyr
Top
Back