Search results for query: *

Negative on the Ham radio. We're out in the boonies and the closest neighbor is about 1/4 mile away, so I don't think there's an RFI issue. Thanks for pointing this out.

Good point -- now that we're coming out of winter, I need to do a bunch of spring maintenance anyway. If the weather is decent this weekend, I'll check all the connectors and the reed switch. The reflector and actuator are going on 25 years old, so none of this would surprise me.

Folks -- I haven't posted in quite a while, which means that all has been well up until a couple of weeks ago. I have an AZBox Premium + and an LNBF hooked up to the GBox 3000 positioner. After not having used the dish for about a month, I turned things on one night and noticed that the counter...

Super -- thanks. I'll give it a try on a couple of strong spacecraft and see what happens.

Folks, In conjunction with my previous post about wanting to simplify, does anyone know if it's possible to delete individual stored position and satellite names in the GBox? I've tried everything, but, it looks like the only thing I can do is to to a reset and wipe out everything. I've...

Folks -- In an effort to try to simplify my programming on my Premium+, I'm wondering if it's OK to use the same DiSEqC 1.2 position number for the C and Ku sides of the same spacecraft? Right now, I have the C-Band side set to one position and the Ku side to another. Clearly, my GBox V3000...

Coming in very late to all of this controversy, I will just state that I had never heard of AzBox, let alone have considered buying a Premium Plus a couple of years ago, if it had not been for Rick's site.

I got way behind, had some foreign travel for work, and had to care care of aging parents in a nursing home. I haven't gotten to the new listing yet. End of March around Easter is my next target date. I can't seem to pull in AMC-7 or 8 anymore. I want to have all the spacecraft precisely...

I also upgraded my Premium+ directly from 5020 to 5402. The picture is fine, but I can't get the dish to move anywhere other than Gal 28 (where I had stopped the dish to do the firmware upgrade). I can't even get the dish to move using the settings window. So, I suspect I'm in for a factory...

Folks -- I recently upgraded to the new firmware. Other than figuring I need to do a factory reset because I upgraded directly from 5020 (discussed in another thread), I can't pull up either YouTube or the internet. I know I'm connected, but everything times out. My router is in the basement...

Folks -- I have a specific question along the lines of internet connectivity. Now that I have finally installed the 9.5402 firmware, I'm interested in using the YouTube capability as well as trying to play streaming radio broadcasts through my connected home theater. I have the Verizon FiOS...

I'm presently in the process of updating my list (Northern VA location) that I posted a year or so ago. I'm still working a couple of bugs with internet connectivity and YouTube after having finally installed the newest firmware. I hope to have something posted in about 2-3 weeks.

I have had my channel list uploaded for about a year now and I'm due for an update. I was going to use one of the utility programs to come up with a clean slate. It sounds as if a factory reset with the firmware upgrade will do the trick. One question: I'm assuming I can keep my GBoz...

Many thanks, guys. Sounds like I have a plan -- and a couple of cheaper sources of cabling.

Fellow AZBoxers: We added a second HDTV in our house in our finished basement. The primary HDTV with my Premium +/GBox combo is upstairs and I would like to be able to watch FTA broadcasts on either HDTV. I need to figure out how to get the AZBox HD signal from one HDTV to the other one...

Folks -- In another thread I said I would upload the table in MS Word I made a while back to record all of the GBox settings. I keep it as a reference in case I ever had to do a complete reset of the GBox. There's no pride of authorship, so please use or don't use as you'd like. I made a...

Despite making sure I have not set software limits on the AZBox, I've found that the usual failure mode is for me after scanning appears when I try to move east. After just a few degrees, I will hit the AZBox-set limit and the dish stops moving because it has hit the software limit. I originally...

Folks - I thought I would pass along my experience using the GBox as a positioner for the Premium +. I haven't upgraded my firmware beyond 5020, so I don't know if the problem would go away with more recent firmware. I am running the positioner and AZBox in DiSEqC mode because of my dish &...

Interesting -- When this happens to me, I assume that the scan found data streams that were neither video or audio or an encrypted set of channels. I think I will try the Satellite Scan on a spacecraft where I know I should be getting something and see what happens.

Yes -- I'm very lucky in that I live in a rural area in northern VA. I have clear line-of-sight throughout the arc and there's virtually no other RF out there either (even cell towers).

Done -- See below.

Files Uploaded as a ZIP file per Iceberg's Suggestion Done -- uploaded as an attachment.

Folks -- I completed restoring my Premium + the other day and thought I would post a current list of North American channels I scanned in case anyone needs a back-up copy or a head start. I can't upload .dat files, so, if anyone would like me to send tham an email with the files to post as a...

Radar -- I've actually used the guide pretty extensively. I even printed out a copy and put it in a 3-ring binder on the coffee table in the family room! For me, the section about backing up and the links to the editor programs were very useful. I also used the guide for how-tos for firmware...

Radar -- Thanks for your help. Welcome back - no apology needed! I haven't tried the MaZEdit 3.2.0.0, but, based on your experience, I will download it when I get back from my current trip.