Search results for query: *

Since two work find get a 3way splitter to put at receiver location use third port for current ant. Then in the rooms that have troubles put a 2way splitter with ant on one port. No need to buy ant, just strip some regular cable and it works as an ant.

You should see how they treat the techs. Regardless the tech should of called you and rescheduled rather than not letting you know anything

Dish looks SE or SW depending on programming and area we use satellites 61.5 72.7 77 110 119 and 129 Schedule an appointment for one of your days off, since Dish could care less we work every day of the week all year long

Without another receiver you will never be able to see more than the two tuners. Hookup as many TVs as you wish but there will always only be two seperate tuners. So any TVs beyond the first two will watch the same programming as the others.

You have DSL forget the sat internet

You can use ViP receiver with the Hopper systems even our training shows how to wire it properly. Dish just doesn't want us to promote that it is possible. Even tho they can be installed together the ViP receivers will not be able to share and integrate as the Hopper does but they will operate...

they are

imo this still isn't worth a damn. the $50 package should start at the 25gb data cap but thats just my 2 cents

The data allowance is not anywhere near what they should be, which is sad, lots of high hopes for this but none at all now. The top 25 GB DAP should be assigned to the bottom $50 package and go up from there imo. Will stay with what I already have as I'm sure most others will also. I feel for...

Ha modern? 750 mhz processor is hardly modern imo nothing more than a paperweight wtf these people thinking? They must be saving a ton of money getting these from the dumpsters Source CES: Dish Poised To Unveil Wireless Broadband Plans, Multiroom DVR: Reports - 2012-01-05 21:14:06 |...

I wish all our customers were that thoughtful of heck even half a third ah heck I'd settle for a quarter of them lol

it is for 1.2 dish no inputs for wing dishes, ony two outputs, so 44 switches for 6 tuners how can that be cost effective? how about some common sense sitting behind those desks for once?

The customer choose when the installs happen so if you schedule for a holiday its on you nobody else and of couse we won't be happy as we wanted that time with our familes also. If you make that statement "I can't believe you work holidays" then don't be suprised if I walk or at least let you...

report every job with pictures of the crap work they do. Convince customers to file damage claims. we have ran out a few crappy subs that have wandered thru our area before

Just get a 1000+ dish and LNB and get all your programming with one dish, yes you will still need the 44 switch

My questions is why does CSR tell him once the promotion programming is removed it cannot be added but DIRT I assume from comments above can add it back. They need to make all CSRs know what can and cannot be done and transferring said customers to higer levels that can do such things rather...

please take the time to report your satisfaction with said techs immediate supervisors

its just hit and miss no way to be sure its a good receiver until it is installed or not. imo the 922 was/is the biggest disappointment to dish network we have seen in a very long time. The fancy GUI is nice but nothing with a 922 that cannot be replicated with a much more reliable receiver in...

my first guess is bad splitter, cable or fittings as 1 splitter should have very very minimal effect on the signals feeding the two tv2s either that or your cable run has multiple barrels in it further degarding the signal. two to 4 quality splitters should be able to be used before you start...

no but needs to be a much better interface

No the mast does not have to be replaced all dishes fit each other except the Superdish as it used a larger mast

This is easily done if you have the parts available. You use any plus dish and skew plate, use the 1.4 arm and lnb bracket and 1.4 or 1.2 lnb. remove any switch you currently have in the system as the new lnb the switch is part of it. In all honesty imo the signal strengths aren't much better...

in the tv settings just turn down the ambient lighting I think it is called

DIRT team is another valuable resource for some here but if you are employed by DNS I would suggest using a different medium for resolving your problems as they always ask for your account info and then they will know exactly who you are and as has been mentioned before sometimes there are...

just the ground on the wires coming from the dish to the house need to be connected to the ground block any wires going into the home do not