Search results for query: *

  1. Z

    ASCI Not Moving East!

    Dang it! Put the end of the wire thru the hole in the floor, went outside and found it there, took off pulling it towards my dish, made to the dish only to find out my remaining security wire is 15 feet short! Anybody know of a cheap direct burial security wire? In the meantime I know I...
  2. Z

    ASCI Not Moving East!

    Brian, I left out that after the first time I left the Linkbox powered down! I did not like that click just after turn on, I will take you word for it that my Linbox is causing my problems, garbage in, garbage out! Seems to happen after I use the last channel button a lot more than usual! I...
  3. Z

    ASCI Not Moving East!

    Brian. Please reread the above. Tues, it worked fine for what I wanted to see. First thing Wed morning I new I was missing a few channels that I had not scanned back in since the skew was working again! I started a blind scan on G-16 and waited for it to finish! It went on for a few very...
  4. Z

    ASCI Not Moving East!

    Brian, it has been at least three times you have asked me to open a new post about this! You sent me a new motherboard despite it being out of warranty, that did not fix it! Thank You Again for trying!! When I read about the ASC1 going away I bought one of the last ones available. It sat in...
  5. Z

    Asc1 Not Moving West

    Brian, he swapped the sensor wires, not the M1& M2 wires! Reread his his first post! JFOK, if the ASC1 is able to read counts in one direction, it can do so in the other direction! In other words, the sensor can be hooked up red to white or red to red or white to white, it is always going to...
  6. Z

    Cband uplink satellites

    whats the difference between analog and digital uplink dishes? Sam, they are the same! They just send send a signal! They never retired a dish to put up a new one to transmit digital!
  7. Z

    ses 1 signal

    Hey Z, this was over on Ricks! https://rickcaylor.websitetoolbox.com/post/me-tv-heroesetc-10368685?pid=1310193782 I hope that link works for you!
  8. Z

    Getting rid of Directv, looking to get a big dish

    Do you have a Home Owners Association? If so, you may need to get special permission to install a big enough dish. Get it in writing!!!
  9. Z

    Getting rid of Directv, looking to get a big dish

    FOX and NBC can be found on C-Band 99.2 Galaxy-16 CTV (Canadian TV) on 107.3 . They sometimes carry some of the really big games! In full 1080i (master channel)
  10. Z

    How to connect actuator/servo to receiver box

    Take another look at mrcleans second photo! The ASC1 will do all you say, but, what about that elevation motor, or whatever it is in the second photo? Also, look at the dish and the mount bolted to it. If put like that on a pole it would be looking straight up! It has no adjustments, It needs...
  11. Z

    Satellite TV spot on Beyond 2000 (80s?)

    Forget about home sat, keep watching past the eiffel tower, then you will get to the plastic engine for a race car! I have always wondered why so many critical parts on a car or truck engine were made of plastic! (plastic intake manifolds,with passages that carry very hot coolant- and others...
  12. Z

    Help with Galaxy 19 pointing

    Welcome to a new member! But, what dish are you using? How big is it? Which LNBF are you using? Are you already able to see other sats? Or is this your first time? I am a C_BAND guy myself, (sorry), but did you program in a known a good channel before searching?
  13. Z

    SES-1, H&I Mux Gone??

    Eugene, yes! Rescan! I also have to rescan on my 9000I but only to delete both new and old muxes! After the new scan, I can rename all those CH-1s to what I had them named to before!
  14. Z

    Luken Changing

    Zack from East Texas, 98 signal, 98 quality. Linkbox 9000i with the Titanium ASC-1 . I am using a Norsat 5??? LNB on a twenty five year old 10 foot mesh dish.
  15. Z

    CONTEST!! Summer FTA Contest!

    I would like to win the AZ Box.
  16. Z

    C-Band pay-tv packages

    Just look at an OTA channel that you can receive and compare it to the same FTA channel ! The bigger the tv the better to see the difference ! FTA Wins!
  17. Z

    Choice of coax cable?

    Now I just need to follow my own advice!
  18. Z

    Choice of coax cable?

    How often do you want to have to trim back 2 or 3 inches on the ends when the center core rusts? Buy solid copper, seal it well, and be done with it!
  19. Z

    PBS Counting Satellite Viewers

    I just called ! Thank You for posting this!
  20. Z

    Finding Water in Venture 18 Motor Cover

    Venture Actuator Limit Switch Adjustment
  21. Z

    Venture Actuator Limit Switch Adjustment

    Look at the cover to the motor, where are the drain holes? On my 36" Venture the motor goes in the up position. The way yours is, it will just fill up with water after you install that cover! Do not ask me why I know this! I do agree with you about not being able to properly set the...
  22. Z

    HH Stab Motor settings

  23. Z

    Question about grounding (lightning/surge protection)

    I do nothing, and the last time I lost an LNB was almost 20 years ago! Dish is not grounded. Coax cable not grounded. No surge protector. I believe this is do to improvements by TXU, my electric provider!
  24. Z

    hitting my funny bone in electronics.

    OK Timothy McGee, if she does exist, what were her replies to your questions!?
  25. Z

    Spring Break GIVEAWAY: AMIKO MINI HD RE

    I Want to Win!! Sorry, no spring break story
Top
Back