Search results for query: *

  1. Martyn

    AMIKO Amiko Mini HD265 and reboot on timer

    No. I thought power but it also reboots when using a USB stick, which is minimal power drain.
  2. Martyn

    AMIKO Amiko Mini HD265 and reboot on timer

    Does anyone have an issue with the Amiko Mini HD265 where is rebooks itself upon a timed recording starting? I'm running the latest firmware and it happens every time. At first I thought it was PSU issue so went from a 12v 1.5A to a 12v 3.0A supply but no difference. The machine also has no...
  3. Martyn

    Linkbox Blind scan shows same channels on multiple birds

    I think I see your problem. First, your dish is pointed at 91W. This is for sure. When you go into your receiver and choose 101W, that will -- on a properly installed motorized system -- send the dish to 101W. In your case the dish isn't moving from 91W at all. But the receiver doesn't know...
  4. Martyn

    GEOSATpro Flashing Video - C and ku

    I recognize this. Just re-scan the transponder and all will be OK. There will have been some change in the transponder that causes that. I've had it several times.
  5. Martyn

    GEOSATpro Locking channel names in MicroHD

    Brian, Thanks for the response. I guess I can't complain the a free piece of software doesn't do everything perfectly. I am surprised that it managed to get named the "official" editor, when it fails on such a basic task. If it had been advertised as "the most capable editor we've found...
  6. Martyn

    GEOSATpro Locking channel names in MicroHD

    Thanks Toucan-man. That's a neat idea.
  7. Martyn

    GEOSATpro Locking channel names in MicroHD

    Yup, just figured that out and found the post talking about Mediabox. ALI seems better anyway. I can list by satellite and make the changes I want to make. Thanks again.
  8. Martyn

    GEOSATpro Locking channel names in MicroHD

    Wow, this MediaBox editor is a disaster. I made all my unassigned satellites favorites and de-favorited all my stored satellites. And it's removed the Diseqc setting from all of the previous favorites. All I did was update a single channel. Geez.
  9. Martyn

    GEOSATpro Locking channel names in MicroHD

    Thanks Primestar, I'll try that
  10. Martyn

    GEOSATpro Locking channel names in MicroHD

    Is there a way I can stop the MicroHD from overwriting channel names? I've renamed lots of channels from things like "Service 2" to "Univision WY" but that now means I cannot blind scan the satellite without losing them. The "lock channel name" feature in the Mediabox Editor ("The official...
  11. Martyn

    GEOSATpro Avoiding the boot loop

    I thought I remembered reading that there was an update in the firmware that stopped boot loops - as long as a new database was in use? I'm sure Geosat advertised that in an update at one point as a new feature. Ah well, here goes nothing ... :) Thanks!
  12. Martyn

    GEOSATpro Avoiding the boot loop

    If I follow the instructions in the "How to avoid the MicroHD "Boot Loop" by properly updating your firmware (and still keeping your old channel and satellite lists)" sticky above, will I then be immune from boot loops? I've had to rescue the MicroHD several times after going into boot loops...
  13. Martyn

    GEOSATpro Channel renaming

    Ahhh, I missed that. Thanks guys!
  14. Martyn

    GEOSATpro Channel renaming

    I've seen this requested a few times, but a search of the forum didn't reveal anymore information about whether this is a feature that is coming or not: The ability to stop the Micro HD renaming channels when it scans. Sometimes that's a great idea, but sometimes (like when the channel is...
  15. Martyn

    microHD Development: Bug Reports and Firmware Fixes

    It's recording TS. I haven't played around with the recorder set-up menus since I found out the defaults were compatible with the PC. I'll play around with it a bit more and see if there is a pattern to when I notice the problem. Is there any other trouble shooting I can do?
  16. Martyn

    microHD Development: Bug Reports and Firmware Fixes

    A selectable "lock" for each memory position would allow some to remain unchanged but others to be preprogrammed. I'm not sure how much work that would be though. I should have explained. If I playback the recorded file on my PC the delay is still there. It's in the video file that has been...
  17. Martyn

    microHD Development: Bug Reports and Firmware Fixes

    When I rename a transponder, such as Azteca 13 on G25, a rescan of the satellite (for the purpose of searching for feeds) returns the name to "Service 2." I'm not sure if this is a true bug, but it would be great if the channel memory routine could check to see if a channel is already registered...
Top
Back