Search results for query: *

I have two remotes I do not use, they do things to my LINKBOX receiver!

I hope this link works! https://www.ebay.com/itm/373883089067?hash=item570d2b30ab:g:~3UAAOSweDBh5c2i Starting bid is 19.99$

Thank you! I never had a 3 lnbf dish!

Why would he need to re- aim?

A Gbox or Vbox will not be able to change the polarity, they have no skew controls! They just move the dish! I am assuming, TVHabit, that your dish still has an LNB and a skew motor! If so, you need the Titanium ASC 1 dish positioner and skew controller! Vbox users have to use the (your)...

MAA, did you see the link I put up for you over at Ricks? https://rickcaylor.websitetoolbox.com/post/need-help-setting-up-linkbox-10105027?pid=1308267650

Just so you know you are not alone! Linkbox 9000i has a bad problem of replacing H&I on DECADES! You have to change the channel a couple of times to get Decades!

OK, Brian, now you and everybody else can say "I told you CAT 5 would not work!" Had a small thunderstorm come through this morning and at every flash of lightning I lost the signal, and at its worst, I never regained it, the flashes were coming so often! CAT 5 was good enough for my old 4DTV...

Brian, thank you again for all your help! The only time I have lost the signal so far has been the bi-yearly solar fade, and stupid me, I just changed over to my OTA clone of that channel, only to find that it worked 30 seconds before they had lost it too!I I miss the old days when you could...

Today is week one with no lost signal! Temps in the twentys (F) in the mornings, so not much on and off on the heat and almost no rain, but no lightning so far! I will try to keep updating weekly until I am sure I will have no more problems!

Brian, the ASC 1 is working good. Thank you again for the new motherboard! And the switcht ! The weather cooperated today and I was able to connect that newly run cable! And , yes, it was the skew motor being energized! After seeing the loss of signal after flashes of lightning, I waited...

I had my friend take pictures yesterday, Monday, It turns out that they were not needed! The tap at the relay fix quit working on Saturday morning and of course my friend was missing again! I was able to replace the motherboard in the ASC 1 but I ran out of time and was not able to connect the...

It worked on the 4DTV for several months and on the ASC 1 when I first installed it! I am hoping that the splice ( x-2 witch equals 6 butt connectors ) has allowed water intrusion! I began this thread because of a sticking relay in my ASC 1, Brian has taken care of me on that! I had forgotten...

Brian, I just cannot bring myself to spend any money for new wire when I can replace a compromised ( spliced ) wire with new wire that I have on hand, it is possible it will work for awhile! Even if it only works for two or three months, I have enough wire to replace it at least two more times...

Today started off a little cold but I never lost the signal, even when the heat came on! I do need to replace the ASC 1 main board as the relay stuck twice today and as Brian said, tapping on the relays is not a long term solution! I did remember that I did repair the cat 5 phone wire last...

I have not replaced the ASC 1 part yet, a friend was to take reference pictures for me last Sat, but he never showed up. Yesterday, at 4PM, I moved the sat to SES 101 and METV. I finally got a chance to go out and look at the probe when it happened , came back in and regained the signal, then...

OK , magic static, this ends here! No more about auto repairs! You admitted yourself (Of course other symptoms would manifest themselves much sooner) ! I would rather discuss my sat problems. I have been waiting to look at my skew probe to see if it may be drifting, but the weather has been...

I agree with everything you said above,except about the radiator cap? I do not see how that could happen? How could a P0128 be caused by a a bad radiator cap?

Most OBD2 CAN readers can only read Generic codes required by the Government! In 1996 OBD2 was mandatory for most vehicles sold in the US. One universal plug ( 16 pin ) that ALL scan tools must be able to connect to! However back then, on some cars you still had to use a special adapter to...

What makes you think that was a crooked shop? The new car dealerships do the same thing.

Update! all day Sat and Sun, no signal loss! Ice present both days. This morning, 50 degrees, lost signal 4 or 5 times when heat came on between 7:30 and 9:00 AM. It got up in the mid 60s today but rained all day, so I had no chance to mark the feedhorn. I did not get to replace the ASC 1...

Update, I received the mother board from Brian and after calling him, he advised me that i should move my dish to 0000 before replacing it! The ASC1 will revert back to 0000 after replacement! (in other words if you left your dish at 0307 counts, then replaced the board, you have to find the...

Brian, after bringing my scope in this morning I DO find a steady 5Vdc between GND/5Vdc terminals! (powered all the time) On the GND/Pulse I had 0V to 5V pulses which the voltmeter was seeing as a little over 1V. What can I say other than I was using the wrong tool in the dark last night and...

Sorry, I took yesterday off from this problem! I tested today with good results! (.2Volts to .4V on each wire, bundled some together with same results) Brian is shipping a new motherboard for my ASC 1 to me free of charge. He even said that he is throwing in a Disect 1.0 switch so I can...

Today I disassembled the ASC 1 and decided I could replace the motherboard. While I had it apart I used the handle of a screwdriver to tap on the relays. It now is working again! I just talked to Brian again and it seems we just did not understand each other yesterday! I did not see his last...