Search results for query: *

Here is the updated list you requested AmericanZ28 . I scanned these in usiing a 7.5' mesh and a DMX741 on a Pansat 3500 , cloudy skies. All these Fr's are active as of 11/14/10 . There are many more here on the site THE LIST. Intelsat 11 43.1 fr 4105 v sr 26470 / fr 4040 H sr 30.800 Int805 ...

Thanx Anole , after reading your post , i agree it is a crappy idea. I think i'll just leave them all segragated . ;}

Maybe i am thinking to hard to come up with the obviuos answer for what i want to set up . What i am trying to do is connect all 3 of my buds to a switch that will allow me to utilize all my recievers ( 4 recievers ) to any dish i require. All of my buds have the DMX741 C/KU LNBF mounted on...

This is true , you can shape metal to most any state you desire depending on grain and flexabilty. I work in a machine shop and i can purchase expandable sheets in steel,,, stainless ,,and aluminum . There are two types to purchase rolled or non rolled ( rolled being flat ). I have noticed some...

I looked it over very well except a string test , all the mesh looks great except one section , but maybe it can be hammered back into shape. Thanx for the the response Anole , i am sure it is a paraclipse due to the unique ribbing structure. Oh yes i am thinking about it , looks like a great...

Should i or shouldn't i , is the question I was at my sister inlaws house this weekend for a wedding , she lives 200 miles from me and i renmemberd the nieghbor had some sort of dish that was no longer in use . I remembered the spot where it was at and didn't see it anymore so i asked . What...

Great info Fat Air thank you , I downloaded all of them except for Page09 - Feed tweaking. It's not in your list . I read thru them and they are well put together and clear .

What Anole is sugesting is create another sat in your sat list They both can have the same name but in the setup menu have one set for ku 10750 22khz on and the other set for c band 5150 22 khz off , just to keep the 2 sats more clear , lable the one your adding c or ku wich ever the case may be .

While i'm on the topic f/d . I am restoring two dishes a 10' prodelin solid and a 8' Perfect 10 mesh. All is going pretty good except i was hoping to have them both up by now . Before i took the perfect 10 down i measured the distance to the lnb and it was 33-5/8" . When i use the above fomula...

Thank you greenguy .

I am getting closer to putting up my 10' solid prodelin. Originaly this dish was a button hook instalation. I am converting it to a four suport arm type.What i need to do is figure out the length of each arm to fabricate.From the calculations below i can see the dimention from the center of the...

All the gears looked great . The one mechanical thing i found bad was the magnets came lose are just floating around in the body . As i mention in the previuos thread i swapped the motor and gear housing out for a more updated one . The Saginaw is going on the shelf for parts . The unit works...

I just finished opening the gear box up all looked pretty good till i went a bit deeper is when i found the reason why the motor would only turn a few revs then eror out in both directions . The magnets that are glued to the inside of the motor housing came lose . It looks like some type of...

Thanx for all the advise . It looks like this acuator is worth keeping . I'll find some time today to open the gear box itself and put some fresh grease in it also inspect for any probs . I will definatly check the reed switch a little more .

The positioner works great on other actuators , so far i tried several combinations of the sensor leads also tried as you sugested without hooking up the sensor wires . The results are the same , just moves a few revs then clicks inside the motor area .Ths arm is so well built i want to get this...

I am getting very close to puting my Prodelin 10' up , till i ran across this Thomson Saginaw actuator. It looks very promising sense it has a 24" stoke and ball screw .I connected it to my Gbox for a test run and it moves just a few revs then errors out with a loud click. The extention arm...

Got m home I have been working on the actuator for the perfect 10 for several weeks now and i am satisfied it is working like new .The dish itself needs a bit of paint before i plant it . I am thinking of dedicating this one just for c-band And i finnaly got the prodelin home ( pics below ) It...

I walked around the solid dish ( Prodelin) it's no bigger than 10' . I am going to pick it up in the morn but what i am thinking is how can i get this dish to look good again as far as paint . As the mechanics go i am sure i can revive it , at the same time it has to look good if it's going to...

I was wondering what the gain differance is between a mesh or solid .Sense i do have the room in my yard ( all 5 acers ) i am going to pick this one up and test it . The mount looks a bit strange to me but i'm sure i will get it back to working order. Reconditioning the components shouldn't be...

Someone beet me to the mesh dish I was driving down the road today and came across these 2 dishes. The price is about just right . The mesh dish is what i was interested in but it looks like it needs a little tlc.What i did i s went back home to get my truck to haul it and when i got back the...

Try these John 45w 3852 v 11029 55.5w 3772 v 13333 61w 3631 h 2785

Lately i find my dish looking at 91w most of the time .

There is quite a bit of music on there acording to lyngsat. (00)

Take your time iafirebuff , this is the perfect time of year to find a free setup or very low priced sysytem. I think $150.00 is a bit high , as Anole said you will most likely run into other cost . I myself have aquired 2 bud systems for 0$ . Most people just want them out of there yard...

I finnaly found the time to experiment with AMC 18 , and am glad to say i got this one nailed down . The simplest answer is usually the best . I went back to Lyngsat and tried again . On the Azbox TP 3780 SR 30000 DVB-S2/8PSK 5/6 Pilot on Guess i need to play with the azbox a bit more.