Search results for query: *

http://www.titaniumsatellite.com/products#!/Servo-Polarity-Skew-Control-Motor/p/35500547/category=6743545

Print and Cut Out. Paste (Glue) it to a peice of cardboard. Use to set.........

Been there, done it....:eek: While loading the a CSV file, it stalled at 39% and stayed that way for 20 minutes or so. Decided to turn it off and Start over again. Wrong !!! Came up with the Display showing as your did. @#$%&%@ damned !! No matter what I did ,the ASC-1 wouldn't move off that...

I too , watched on 91w......that guy was crazy !!!

Scanned in the Manual for you;

You'll need a Polarotor II Motor, it only has 2 wires ( good luck ) in order to use that 2800A Box. I had one of those boxes last year to play around with. Couldn't get it to work the 3 Wire Polarotor motors, so off to the Goodwill Box it went. Below is a pic of the wiring diagram...NOTE the...

I purchased one and installed over the weekend. Very satisfied with my purchase...I anticipated the few hiccup from a NEW product .:bow

Are you using the Serial Cable that was provided? If so, that the problem. The wrong cable was shipped !

In your "Main Menu", scroll down to "System Reset", then to "Reset Soft Limit .....Press OK

Not Mine.................. https://www.youtube.com/watch?v=1cN56MDcaAs https://www.youtube.com/watch?v=hXB0aKk9GjY

Satellite Dish, Receiver, Positioner, Descrambler - $100 (Valparaiso, In.) http://chicago.craigslist.org/nwi/ele/4055659671.html

You should of had a least 4 Nuts leftover................ those need to go to Mast Bolts, they are used as "Jam-Nuts" to keep those bolts from turning, over time.

" . " ;):rolleyes:

http://www.satelliteguys.us/free-air-fta-discussion/226869-6-foot-c-ku-band-prime.html

Use the v-box to move the actuator

art project.................:eek:

You would use 1 & 3 .

This may Help: TA24 and TA18 Limit Switch Adjustment

I'm using one similar to that . It's has a OD of 3" and I need a 3 1/2" for the 8' Perforated Dish I picked up recently. My son is making me a Stainless Steel Sleeve at his workplace, that will adapt to it. I got my Post at a Garage Sale ( $10.00) it is like the ones that Menards sells...

That looks like it would be a tight squeeze with a 6 footer there! Banging and bumping into it?

Picked up the Dish today. ( It's a one piece Perf Dish )Surprised it took only about a Half Hour to get it off the Pole. Thought for sure we would struggle with the mounting bolts,but a few shots of PB Blaster and a few taps with a hammer,the bolts broke free and was loosening up. Took the...

Yes...ONLY on the Back of the Dish. ;) .

Dee... I think it was me you were referring to. I used the Rubberized Undercoating on the Back of my Bargain 6 footer,that has held up well. Can pick up at any Auto Parts Store, Walmart,Lowes,Menards,etc..... **** If you use the Rubberized Undercoating, wear Gloves. It can get a little messy...

No Painting the Dish.....(Going Natural' ),the Mount with get a Rust Treatment and a couple coats of paint, all after getting a Pressure wash. ;) .

I won't be able to see it first hand until Monday,but for the price I think it will fit in the trailer just fine and give it a new Home ! :car: It will be a nice project,clean up & paint, that will keep me busy for a week or two. .