IR/UHF Pro 4.0 Remote Programming?

Discussion in 'The DISH Forum' started by SuperHumanly, Mar 10, 2009.

  1. SuperHumanly

    SuperHumanly Thread Starter New Member

    Joined:
    Mar 10, 2009
    Posts:
    3
    Likes Received:
    0
    how do i get the remote to work with my Hitachi TV? I don't have the user guide or anything...


    Thanks :)
     
    #1
    Avatar

    Advertisements Register Today!



    Reigster at SatelliteGuys
  2. srbCARROLLTON

    srbCARROLLTON Member

    Joined:
    Mar 6, 2009
    Posts:
    38
    Likes Received:
    0
    1. manually turn on the tv

    2.press and hold the tv button until all the lights flash red, then release the tv button, the tv button should now be steadly blinking red...

    3.press the power button and release it. now the tv button should be solid red...

    4.now slowly press the down button repeatedly (SLOWLY!!! (allow 2 seconds between pushes)) until the tv turns off.

    5. press the pound button

    should be good to go... let me know
     
    #2
  3. SuperHumanly

    SuperHumanly Thread Starter New Member

    Joined:
    Mar 10, 2009
    Posts:
    3
    Likes Received:
    0
    Just tried that, hit the button quite a few times with no results, one of the times the "SLEEP TIMER" thing popped up, but the TV never powered off. I tried again and locked the code onto the one that made the SLEEPT TIMER pop up, but none of the other keys did a single thing.


    I stopped hitting the down arrow when the lights started blinking about 4-5 times in a row after hitting down.


    TV is no more than 2ft in front of me, with a direct line towards the remote sensor. New batteries in the IRUHF Pro, also.


    Edit: I also found this PDF guide, which lists the remote codes for all brands -- strangely enough, NONE of the Hitachi codes worked.

    http://www.dishnetwork.com/downloads/pdf/technology/remote/3_31_4_Remote_Control.pdf
     
    #3
    Last edited: Mar 10, 2009
  4. srbCARROLLTON

    srbCARROLLTON Member

    Joined:
    Mar 6, 2009
    Posts:
    38
    Likes Received:
    0
    Okay... try theses codes...

    523, 526, 548, 549, 553, 554, 555, 585, 597, 626, 636, 638, 643, 648, 652, 654, 655, 665, 688, 669, 670, 672, 673, 702, 718, 726

    press and hold the tv button just as before, except now after the buttons all light up, enter theses codes one at a time and press pound after each one and try to turn the tv on and off...
     
    #4
  5. srbCARROLLTON

    srbCARROLLTON Member

    Joined:
    Mar 6, 2009
    Posts:
    38
    Likes Received:
    0
    by the way DO NOT hit the power button after holding the tv button this time...
     
    #5
  6. SuperHumanly

    SuperHumanly Thread Starter New Member

    Joined:
    Mar 10, 2009
    Posts:
    3
    Likes Received:
    0
    Nope. tried all those codes and the TV didn't turn off...

    Although, with the 674, the Volume, Mute & Channel Up/Down buttons did work, but not power, or any numbers.
     
    #6
  7. srbCARROLLTON

    srbCARROLLTON Member

    Joined:
    Mar 6, 2009
    Posts:
    38
    Likes Received:
    0
    well thats all I got... those were all of the codes for that brand... sorry
     
    #7
  8. da bears

    da bears Member

    Joined:
    Dec 2, 2003
    Posts:
    50
    Likes Received:
    0
    4.now slowly press the down button repeatedly (SLOWLY!!! (allow 2 seconds between pushes)) until the tv turns off.



    Might try pressing the up button also.....I think it works both ways
    It's worth a try!
     
    #8
    Last edited: Mar 11, 2009
  9. srbCARROLLTON

    srbCARROLLTON Member

    Joined:
    Mar 6, 2009
    Posts:
    38
    Likes Received:
    0

    Yea it just starts from the bottom of the internal "list" of codes instead of the top...
     
    #9

Share This Page

VigLink badge
Sucuri