Kijiji, eBay, and Craigslist dishes for you to take a look at

[Martyn]

10ft dish, Carson City, NV
with actuator and mount for just $25!

http://reno.craigslist.org/bar/4842107984.html

 

[Jason S]

Dish with stand and cable...
http://topeka.craigslist.org/ele/4794989685.html

 

[dotbatman]

Dish with stand and cable...
http://topeka.craigslist.org/ele/4794989685.html

View attachment 104702

If I'm not mistaken, that's a Birdview. Someone go get it!

 

[. Raine]

A 33" dish with a switch, Invacom QPH301 and SG2100 motor for $80:

http://newhaven.craigslist.org/ele/4836135146.html


Oops, I see that Kittyhas1000legs already posted this one!

 

[kittyhas1000legs]

A 33" dish with a switch, Invacom QPH301 and SG2100 motor for $80:

http://newhaven.craigslist.org/ele/4836135146.html


Oops, I see that Kittyhas1000legs already posted this one!

I'm tempted, but I might catch hell from the wife... maybe if I get rid of the unused WorldDirect dish... I'm hoping to have a good setup once we move, so perhaps this one for general use and the 1M for 125W?

 

[beavs2112]

Prodelin 1.8M with NPRM C$1000 Dundas Ontario Canada
http://www.kijiji.ca/v-electronics/...bf/1044819946?enableSearchNavigationFlag=true

 

[RimaNTSS]

Prodelin 1.8M with NPRM C$1000 Dundas Ontario Canada
http://www.kijiji.ca/v-electronics/...bf/1044819946?enableSearchNavigationFlag=true
View attachment 104732 View attachment 104733 View attachment 104734 View attachment 104735 View attachment 104736

This is nice dish and stand! Almost exactly as I have with only difference that I payed about 10 times less. But this one has Tx/Rx LNBF.
8 fixing bolts look very rusty, should be changed to INOX.

 

[. Raine]

I'm tempted, but I might catch hell from the wife... maybe if I get rid of the unused WorldDirect dish... I'm hoping to have a good setup once we move, so perhaps this one for general use and the 1M for 125W?

I was tempted too, even though I'm not crazy about the SG2100's. If it was closer to me I probably would get it. 33" should work all right on everything except 103W and 125W, I have one setup on 87W and one on 97W right now and they're good. Had one of them motorized on a SG2100 for a year or so, but the gear inside the motor chewed up, but before that happened, 103W and 125W were the only sats I had problems with. Most of the time 125W would actually come in, if the weather was Ok.

 

[lost_mesa]

http://albuquerque.craigslist.org/for/4875170508.html

 

[Cosmo Blatz]

Sell one for scrap, keep one, and add the receivers to your museum of obsolete satellite equipment.

http://siouxcity.craigslist.org/ele/4859415775.html

In a large part of the US, it's the wrong time of year to persuade someone to come and remove a BUD. It will be interesting to see what turns up in spring!

 

[beavs2112]

Wasau $100. 12 foot. Maybe H-H mount?
http://wausau.craigslist.org/for/4862748057.html

 

[beavs2112]

Wasau $2000.00 Patriot 3.8M AZ/EL
http://wausau.craigslist.org/bfs/4813770959.html

 

[Cosmo Blatz]

Wasau $100. 12 foot. Maybe H-H mount?
http://wausau.craigslist.org/for/4862748057.html
View attachment 105092 View attachment 105093 View attachment 105094

Combination satellite dish mount and deer hunting tower.

 

[ancient]

Wasau $100. 12 foot. Maybe H-H mount?
http://wausau.craigslist.org/for/4862748057.html
View attachment 105092 View attachment 105093 View attachment 105094

Looking at the square pole I suspect that is a Winegard, which are great dishes except that the focal point is totally wrong for modern C-Band LNBs, and it's not always readily adjustable (this one might be, though - it appears to be a different style mount from the non-adjustable buttonhook ones they used on their 10 foot dishes. Hard to tell if it's adjustable or not). But they usually work great if you are going to use an old Chaparral or similar feedhorn, such as the one pictured on the dish.

It should be noted that the bottom half of the pole is missing so you'd have to fabricate something (unless they have it tucked away somewhere and would include it). I would NOT recommend putting it on a utility pole as they did, because wood warps and twists as the seasons change, which is deadly to keeping accurate aim.

 

[Michael Nixon]

Anybody know where I can get a hold of a nice 12 footer C band setup even a reliable place to buy them?

 

[DK_Sat]

Where are you located?

 

[Michael Nixon]

Where are you located?

01104 Springfield Massachusetts

 

[beavs2112]

Anybody know where I can get a hold of a nice 12 footer C band setup even a reliable place to buy them?

I'm not affiliated with any sellers. Depending on your definition of "nice" a company called tek2000 sells new made in China (not made in canada as originally claimed) mesh dishes on amazon as tek2000/satellites-galore. They are about the only option for lower priced new mesh dishes at this point in North America. However they have had .... shipping damage issues due to packaging in cardboard, poor quality welds, misaligned dish to back frame joints. Though lately they seem to be making things right with buyers.
There are multiple threads about tek2000 here on this site & others Michael. I suggest reading these threads.
http://www.satelliteguys.us/xen/threads/about-tek2000-com.344476/#post-3620353
http://www.satelliteguys.us/xen/threads/need-help-sourcing-parts.346825/#post-3620620
http://www.satelliteguys.us/xen/threads/this-10-foot-any-good.341412/#post-3615120
http://www.satelliteguys.us/xen/threads/need-8ft-c-band-mesh-dish.332811/page-2
http://www.satelliteguys.us/xen/thr...ite-pics-fake-pics.333398/page-2#post-3456889
http://www.satelliteguys.us/xen/threads/tek2000.332759/#post-3403570
Here's a thread from Rick's forum on a recent purchase of a 12 foot.
http://rickcaylor.websitetoolbox.com/post/new-12ft-mesh-dish-7200365

 

[Michael Nixon]

I'm not affiliated with any sellers. Depending on your definition of "nice" a company called tek2000 sells new made in China (not made in canada as originally claimed) mesh dishes on amazon as tek2000/satellites-galore. They are about the only option for lower priced new mesh dishes at this point in North America. However they have had .... shipping damage issues due to packaging in cardboard, poor quality welds, misaligned dish to back frame joints. Though lately they seem to be making things right with buyers.
There are multiple threads about tek2000 here on this site & others Michael. I suggest reading these threads.
http://www.satelliteguys.us/xen/threads/about-tek2000-com.344476/#post-3620353
http://www.satelliteguys.us/xen/threads/need-help-sourcing-parts.346825/#post-3620620
http://www.satelliteguys.us/xen/threads/this-10-foot-any-good.341412/#post-3615120
http://www.satelliteguys.us/xen/threads/need-8ft-c-band-mesh-dish.332811/page-2
http://www.satelliteguys.us/xen/thr...ite-pics-fake-pics.333398/page-2#post-3456889
http://www.satelliteguys.us/xen/threads/tek2000.332759/#post-3403570
Here's a thread from Rick's forum on a recent purchase of a 12 foot.
http://rickcaylor.websitetoolbox.com/post/new-12ft-mesh-dish-7200365

Thank you very much but taking the time to compile this list for me.

 

[beavs2112]

Thank you very much but taking the time to compile this list for me.

You're welcome I wouldn't want to mention them without including the threads. People should make informed purchases these days.