Upgrading receiver

Status
Please reply by conversation.
Yes, sounds like you accidentally hit the V.Format button. Do like FaT Air suggested to get the video back.
Forget about trying to use auto install.
The receiver comes set for 10750 for the local oscillator(LO). Is your LNBF universal?
If so set to 10600 and turn 22khz on.
Then try a blind scan.
 
The auto install feature only works in Europe. North American satellites are not supported with this mode. Use the advanced install mode and remember to match the LO frequency of your LNBF before scanning.
 
Titanium,

I have ordered a Dreambox DM800se from aliexpress and so far had good luck with it and must have installed and tested at least 30 images over the last three years. I was looking at the Vu+Solo2 as it has two LNB inputs. This way I could use one of those C\KU-Band LNB's for one of the LNB inputs and the 17x10 Multiswitch will all my other LNB on the other input. I know I'm taking a chance and it could be counterfeit or cheap china crap but I have been ordering electronic gadgets from AliExpress for over 3 years with only one problem. I ordered a micro SD card and was sent a regular sized SD card and used the AliExpress Buyers protection and got a refund and they let me keep the full sized SD card.
 
I have one for sell now and it works great one input on c-band and the other on ku the only problem it is Egima2 and i got tired of using it
 
It suddenly started working well yesterday. Go figure.


1. Great picture. So much better than it was.

2. Great interface. User friendly. This will be perfect for my parents....and save me so many phone calls lol.

3. Now I need to figure out how to get my motor to work with this. Please tell me it will. I forgot to mention I have a motorized dish.
 
Since you said before you wish you could have a BUD, I will assume you have a motor for your Ku dish.
Best was is to use USALS. Assuming your motor is already set from your other receiver:

Go into the satellite set-up and choose each satellite you use. Then go down to motor and set it for USALS.
Hit the OK button with USALS highlighted and it will give you a place to set your Long. and Lat.
Make sure it set for N and W. You only have to enter your coordinates once, but you will need to go into every satellite you use and set motor for USALS.
Then once you go to each sat your motor will move.
Let us know if this quick run down was not enough info for you and I can go into more detail.
 
Yep, finally got some time tonight. I have a 60" and mounted a 40" above it, so I am watching the Cavs game while messing with the FTA.

We're happy. All going well, this picture is GREAT compared to what I was used to. Talking to the wife, she is right.....I had that Lifetime receiver for 9+ years. Kudos to Fortec for a long lasting receiver, but it was time.


Thanks to everyone for the help. I'll be getting a second unit to hook up at my parents pretty quick.
 
Glad you have it running and enjoying it. It is a nice little receiver.
 
Glad you have it running and enjoying it. It is a nice little receiver.

Yes sir I totally agree. I want to add one thing its FAST also has a nice full size remote.

Has alone tried Big2Small On Android 5 "lollipop"?
 
recommended wifi dongle?
Supposedly any one with the Ralink RT5370 chipset.
I have one here though that I could not get to work, however I did not open to see if it had the right chip.
I have another here that works fine, but don't remember where I got it.
 
I got mine from ebay seller electriczone. same ad as this but when I purchased it had the Ralink RT5370 chipset. was in the description, Maybe contact and confirm.
There's also this one. with chipset in details
 
Me again. Got me the right chipset wifi dongle, still can't get the receiver to recognize it. Made sure it is the right now by verifying the chipset on my laptop.

Hooked it up. Ethernet. Wireless. "No wireless device exists."


Help please.
 
I have ran into the same issue. I have several that say the right chip-set number on them but will not work.
Then I have another one that will.
Not sure what is going on with that.
 
The Amiko A3 model adds the ability to run any Android app from the Google Play store such as Netflix, Sling, SiliconDust OTA, Kodi, games, etc.

The mini HD SE is a great satellite receiver. Just depends what you want or need.

Anyone know of Android for the Ultra and/or Elite Azbox?
 
Status
Please reply by conversation.

I'm finally getting around to installing my "new" GeoSat Pro 90cm

Contact Lost with Israeli built Amos 5 (17E) satellite

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)