DISH Hopper Carbon UI Testing Forum - PLEASE READ!

My 612 and 722k still do a scan and keep old channels and you can add the one by one
Wow, I never knew that. When I had the 612, 722, and then 722K, I never had the OTA adapter, so I thought all Dish receivers acted the same way. Who would have thought that the older receivers would have a useful feature that the Hoppers do not have!
 
Except that it is impossible to scan and save channels from multiple directions, but that is a problem with all Dish Hoppers.
I fixed that for you. The ViP receivers do exactly what you want. There is one small glitch that I have noticed with the ViP series: sometimes when a scan finds a channel that barely comes in, it will remove that channel from the list, requiring you to do a re-scan (or manually add the channel) to get it back. Still, that is much better than deleting all channels that it does not find, the way the Hoppers do.

Wow, I never knew that. When I had the 612, 722, and then 722K, I never had the OTA adapter, so I thought all Dish receivers acted the same way. Who would have thought that the older receivers would have a useful feature that the Hoppers do not have!
The 612 and 722 (non-k) have the OTA tuner built-in. Of the ones you listed, only the 722k needs a module for OTA.
 
  • Like
Reactions: charlesrshell
Tell me the CUI allows "roll over" of setting timers on HWS #2 when all the tuners on HWS #1 are in use - and THEN I'll be mollified.
 
I get stations from 2 different markets. Image shows one example - WDTN is NBC in Dayton while WLWT is NBC from Cincinnati
IMG_20170527_155135.jpg
 
I get stations from 2 different markets. Image shows one example - WDTN is NBC in Dayton while WLWT is NBC from Cincinnati]
Please tell me how to scan and save stations from multiple directions with my Hopper (I have to rotate the antenna to at least 3 different directions in order to receive all of the OTA channels). Either I have to have an omni-directional antenna (stations are not strong enough), or I have to have several antennae pointing in different directions all hooked up at once (not practical). When I tried, there was no way to scan and save all the channels because all the previous channels are erased when doing a new scan, and there was no way to add a channel. Has that changed?
 
  • Like
Reactions: pattykay
Please tell me how to scan...
Sorry, I kinda lead you on there.... Where we live is ~35 miles from the Cincinnati towers (most of them) and ~8 miles from the Dayton towers (all of them). I'm so close to Dayton's towers that I just point at the Cincinnati ones and still pick up the Dayton ones (at 100%).

I know that I'm 'lucky' in this regard.
 
  • Like
Reactions: pattykay
Now that I have had the new CUI in my HWSs the last couple of days, can someone help me with the following? Thanks for your help.

1. In the schedule menu, when I click on a scheduled timer I cannot find the Edit Event selection.

2. In the Back Up Settings menu, I cannot find the last date and time that the remote and receiver was backed up.

3. Is the remote and receiver back up still done automatically once a week?

4. In the EHD I cannot find the option to list recordings by episode number.

5. I cannot find the Hopper DVR temps.
 
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 4)

Latest posts