How do I get started
- Thread starter coltonjared
- Start date
- Latest activity Latest activity:
- Replies 348
- Views 29K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
For those who have painted there dishes how many cans of spray paint did you go through? I bought 3 cans of paint and barely got three of the four back side panels done
I used about 20 cans of the cheap 99 cent Walmart flat back paint. I thought the paint would flake off. Holding up great here in south east.
Sent from my SM-G930V using Tapatalk
I used a can and a brush to paint mine... 
Guess I should also include "step ladder". I also painted part of it too, but not purposely.
Guess I should also include "step ladder". I also painted part of it too, but not purposely.
If I were you I wouldn’t even bother painting or cleaning the Dish. Because your old dish was stolen, the scrappers would be all over a fancy “new” dish. If it looked crappy, they would just drive past.
Sent from my iPhone using the SatelliteGuys app!
Sent from my iPhone using the SatelliteGuys app!
Does anyone know the screw size for the bolts that comes with titanium’s lnb? I’m missing one and figured I can grab something at work to replace it
I believe they are metric M6-1.0 -- x 15mm Long.
Grade 12.9.
I’ve seen this automatic polarity controller and wonder if it’s any good.
Automatic Polarity Controller
When I took the dish down it had a Corotor II on it and wouldn’t mind seeing how it performs
Automatic Polarity Controller
When I took the dish down it had a Corotor II on it and wouldn’t mind seeing how it performs
Yes, that device does work well, and it's priced about right. Though you can make your own (I did in 1985 with a 555 timer chip, and I still have it. Though mine was used with an old analog receiver), you'd probably spend about the same gathering electronic parts. Unless you had a stash of parts laying around, like most of us, LOL.
You think I’d be better off using the corotor lnb or stick with the Cband/ku band lnbf I bought from titanium?
A correctly functioning corotor with good LNBs will keep you from ever wanting to use a combo LNBF ever again.
So I ordered the automatic polarity controller. Am I right to assume it won’t allow fine tuning of the screw? Is there a certain way I need to install the corotor?
- Status
