OTA adapter on the Edision OS MIO 4K

Magic Static · Mar 12, 2019

I was on eBay earlier looking at both of those. I found one listed as a 950 but what was pictured was a 955. It was priced like a 950 but I asked the seller to specify which one it was for sure. He said he made a mistake listing it and it was indeed a 955Q and he would correct the listing. This all took place in a few minutes and I popped back to the listing to buy it and found not only did he correct the model number he raised the price $20 and added shipping making it about the same price as the others I looked at.

So I passed on that.

primestar31 · Mar 12, 2019

SDA_FL_USA said:
Using openvix. Menu/setup/tuner config/Miscellaneous
Turn off "no" all 3 ignore DVB-S,DVB-C and DVB-T namespace subnetwork.Then green button to save and exit out back to tv.
Open channel selection list and press green button "Satellites" Delete or remove the Terrestrial Services with menu button.
Rescan the ATSC channels again with Manual scan,scan type complete.
After scan go to Terrestrial-Services they will still show no rhyme or reason. Now reboot the mio4k and go back to Terrestial services and if they are in order go back and Turn on"yes" all 3 ignore dvb-s,c and t.
They should stay in order after that.
You can do same with other images but the ignore dvb is in different location than Openvix.

.

Wow, why not just use dreamboxEdit or maybe even Webif screen bouquet edit will reorder them after they've been saved to Favorites?

SDA_FL_USA · Mar 12, 2019

primestar31 said:
Wow, why not just use dreamboxEdit or maybe even Webif screen bouquet edit will reorder them after they've been saved to Favorites?

That works also. My favorites are a mix of Sat and terrestrial.I use Sat channels as fillers to keep the terrestrial lined up with their corresponding number except the sub channels. Terrestrial ch.3-1 on 3. 3-2 on 4 and so on.

Magic Static · Mar 13, 2019

SDA_FL_USA said:
The Xbox One Hauppauge tuner is the same as 955Q and about $20.00 less in price.

From what I can tell, it looks like the X-Box version doesn't do the video capture like the other. Which is cool because I didn't plan on using that option.

Magic Static · Mar 13, 2019

I found I had forgot money in my PayPal account I got for selling a couple of custom AJAK sensors and BirdView sensors to members here. So I turned that into an Edision + ATSC stick

I love getting new toys

SDA_FL_USA · Mar 13, 2019

Magic Static said:
From what I can tell, it looks like the X-Box version doesn't do the video capture like the other. Which is cool because I didn't plan on using that option.

Why it doesn't have video capture because it's not sold with the cable for it but it does have the port for the cable so if you have a cable it will do it.. That's not really needed because the mio4k or a PC can capture the video with recording. Xbox One tuner also doesn't come with the little remote for PC use. Anouther reason the price is less.

comfortably_numb · Mar 18, 2019

Anybody know which image (if any) best displays PSIP data for OTA channels? OpenVIX pulls guide data for a few channels, but not all. It's hit or miss. If there's a source for pulling in guide data, I'd appreciate any advice on where to find that

primestar31 · Mar 18, 2019

comfortably_numb said:
Anybody know which image (if any) best displays PSIP data for OTA channels? OpenVIX pulls guide data for a few channels, but not all. It's hit or miss. If there's a source for pulling in guide data, I'd appreciate any advice on where to find that

Well, you have 4 slots to load 4 different images, so you have 4 chances to play and see if one seems better than the others.

Magic Static · Mar 18, 2019

I got my Hauppauge XBox One ATSC tuner. Hooked it up and was looking at a complete EPG for my locals 30 minutes later.

The driver was already there.
It took the LG Electronics LGDT3306A USB/QAM driver

comfortably_numb · Mar 18, 2019

Magic Static said:
I got my Hauppauge XBox One ATSC tuner. Hooked it up and was looking at a complete EPG for my locals 30 minutes later. The driver was already there.
It took the LG Electronics LGDT3306A USB/QAM driver

A complete EPG? Wow! Mine only shows it once you've actually tuned to a channel.

Magic Static · Mar 18, 2019

comfortably_numb said:
A complete EPG? Wow! Mine only shows it once you've actually tuned to a channel.

Well of course I had to briefly visit each frequency to get the 15 channel local bouquet.

comfortably_numb · Mar 23, 2019

Magic Static said:
Well of course I had to briefly visit each frequency to get the 15 channel local bouquet.

Yes, this is the key- when the receiver boots up, flip through all the channels in the guide, and it will populate the guide data. There is probably a way to force the box to do this automatically but I haven't discovered it yet.

Titanium · Mar 23, 2019

Might be a fun project to populate Sat and ATSC EPG with zap2xml data

primestar31 · Mar 23, 2019

Titanium said:
Might be a fun project to populate Sat and ATSC EPG with zap2xml data

I wonder if this can be made to work with TitanTv also, that's the guide I much prefer and have been using.

zap2xml

Ok, guess this version answers my question above: mc2xml

comfortably_numb · Mar 23, 2019

I wouldn't think it would be too difficult to do; there are already a bunch of XML sources built-in, but they're only for Europe. We just need to point to a source and add it to the list:

comfortably_numb · Mar 23, 2019

So it looks like it is possible to manually inport an XML file that our Enigma images can parse for guide data, it just needs to be done manually.

primestar31 · Mar 23, 2019

comfortably_numb said:
So it looks like it is possible to manually inport an XML file that our Enigma images can parse for guide data, it just needs to be done manually.

Think more along the lines of a scheduled "Cron job"...

Titanium · Mar 23, 2019

epgimport plugin might be an automated option. This looks interesting: xmltv install / configure for ATSC / OTA U.S.A

Corrado · Apr 11, 2019

Ordered a 950Q while waiting for my new receiver. I've been reading everything I can find and even downloaded a few E2 images to try out. Looking forward to the OTA tuner feature, one thing my Amiko cannot do.

primestar31 · Apr 11, 2019

Corrado said:
Ordered a 950Q while waiting for my new receiver. I've been reading everything I can find and even downloaded a few E2 images to try out. Looking forward to the OTA tuner feature, one thing my Amiko cannot do.

Trust me, start with the North American SatDreamGr image first.

IMO, it's by far the easiest one to learn and get used to E2, and I much prefer it over any of the other 4 images I've tried so far. That may change in the future, but I doubt it.

We need some people with the ability to code to get their hands on one of these also, as they aren't at present capable of decoding CC for North America. It can do it in Europe, but as usual, the USA does it all differently, so E2 has never been coded for our version of CC/Sub Titles.

I doubt it would be all that hard to do, as even the Geosat MicroHD could do it 7 years ago. It just needs somebody with the interest and ability to do it for us.

OTA adapter on the Edision OS MIO 4K

SatelliteGuys Master

SatelliteGuys Master

SatelliteGuys Pro

SatelliteGuys Master

SatelliteGuys Master

SatelliteGuys Pro

Dogs have owners, cats have staff

SatelliteGuys Master

SatelliteGuys Master

Dogs have owners, cats have staff

SatelliteGuys Master

Dogs have owners, cats have staff

AI6US

SatelliteGuys Master

Dogs have owners, cats have staff

Dogs have owners, cats have staff

SatelliteGuys Master

AI6US

SatelliteGuys Pro

SatelliteGuys Master

Similar threads

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 9)

Share this page