Stab-HH90 Motor

Toggle sidebar
  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.
Titanium said:
Were / Are you sharing the same satellite.xml between images? If so, maybe sharing corrupt data?
It's possible between VIX and PUR but PLI came with its own. After behaving for a length of time while running PUR E2, it has started acting up again. It has started a new thing now where I tell it to go to another sat, the image shows that it is moving to another sat and that it has arrived but the motor never moves. I have to power down the Mio and power back up again for it to start working again -
Click to expand...
Click to expand...
 
Do you have the option selected in the tuner setup menu to reissue DiSEqC commands? After I added a DiSEqC switch with motors and controller on the other side, I had to enable the DiSEqC command reissue for the motors and controller to reliably respond.
 
  • Like
Reactions: raydio
Titanium said:
Do you have the option selected in the tuner setup menu to reissue DiSEqC commands? After I added a DiSEqC switch with motors and controller on the other side, I had to enable the DiSEqC command reissue for the motors and controller to reliably respond.
Click to expand...

I think I've seen that option in the tuner setup...if so I will try it -
 
UPDATE - - -

I ran a temporary coax and still had the same problem. I found a source of HH-90 motors in Canada for a VERY good price so I purchased another as it was actually cheaper than buying a USB tuner or Stab mini positioner to reset the motor I had. I have had it in service for over a week and have not had the oscillation issue. So it seems that my old motor indeed had an issue.
 
  • Like
Reactions: comfortably_numb, Titanium and FTA4PA
Status
Please reply by conversation.

Similar threads

O
OTHER STAB HH-120 motor maintenance
Replies
17
Views
1K
FTA Receiver / Equipment Support
OswaldFTA
O
M
    • Like
New Motor!
Replies
27
Views
3K
comfortably_numb
comfortably_numb
4311wade
Edision USALS motor
Replies
15
Views
683
FTA Receiver / Equipment Support
FTA4PA
FTA4PA
Texan61
Stab HH 100 mounting bracket
Replies
1
Views
817
Texan61
Texan61
S
OTHER Adding Motor
Replies
1
Views
411
FTA Receiver / Equipment Support
Titanium
Titanium

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 5)

Latest posts

Share this page

Share this page
Top
Back