Complete newbie needs help with installation
- Thread starter dangerpl1
- Start date
- Latest activity Latest activity:
- Replies 27
- Views 3K
if the receivor does not have a sat in the check switch screen you might not see the signal on the reveivor even if you are hitting the bird. You might try a cheep meter. And you also might have some bad equipment
Get the meter - It helps two ways:
1. Tells you when you are receiving a signal
2. Tells you if you are getting power through the coax cable
The meter I have has a little light in it that will backlight the meter when hooked up. One of my cables had the center wire too short and was not making a connection when hooked up. Swapped out the cable and got the backlight and soon found the sats as well.
You will have to move VERY VERY slowly right to left and back again in the area of the correct azimuth, then if nothing, change your elevation a bit and try again with the azimuth. 119 can be very picky.
You don't have any trees or branches anywhere near the direction the dish is pointing do you?
1. Tells you when you are receiving a signal
2. Tells you if you are getting power through the coax cable
The meter I have has a little light in it that will backlight the meter when hooked up. One of my cables had the center wire too short and was not making a connection when hooked up. Swapped out the cable and got the backlight and soon found the sats as well.
You will have to move VERY VERY slowly right to left and back again in the area of the correct azimuth, then if nothing, change your elevation a bit and try again with the azimuth. 119 can be very picky.
You don't have any trees or branches anywhere near the direction the dish is pointing do you?
I posted a link to dishstore above. Sometimes you can find them in local stores, but they are all over the internet.
Sadoun is #1 SatHawk & BIRDOG reseller in the country.
read about the meter befor you buy it and you dont need a fancy one for home use dont wast your money
