Search results for query: *

Yes you can take a old satellite list from older FW and use it with newer FW, you will have the same satellites listed with their Tp's and LO with the switch settings but no TV or radio channels will show up. I know because I did it here, and my thoughts where that it would not work but it is...

I only have used Diseqc 1.2 here also. with a Elite, and a Ultra. the only time that mine will not wake up the G-box is if it is on 1 of my fixed satellites that I do not have a Diseqc 1.2 turn on and boot the receiver, but if I call up a satellite that is with a motor location no problem at...

are you using the 5020 fw??

only if that satellite has NEVER had a position # store before, if it has been stored with a position # and you want to change that position # to a different #, now you have to use a editor to do the changing.

all is right on for the info sanjap gave you. but you may want to store 2 satellites with the same number for the g-box, and this will be only for some dual satellites that are C & Ku satellites, so if you ever have to re-program the g-box you don't have to do both sats. in the DiseqC mode...

I use AZbox edit 2880, you can also use Maz and I have used both 2.3 an 3.0, but with Maz you can NOT send it back to the receiver, it will corrupt you list if you use MAZ to send it back, but not with the 2880.

when storing the position locations in the AZ, their is no need to return back to "Go to Position", just select you're position number or leave it on auto and click on save (you should see the G-box blink with the number that was saved), then exit out of the 1.2 part of the menu. now as far...

You need to re-check you're findings their. with the 5020 fw right now, and in the 1.2 mode works like a champ with no problem at all. when I tried the 4295, an the 4880 it changed motor position numbers around, but that was because of the channel list got corrupted, but the AZ has always ran...

1-2-3-4 is the step amount that you want you're dish to move in the 1.2 mode when you're in the installation mode. and as far as the 2-satellites, I don't know and that's a very good ? it could of been 4, 10, 20 or more, but in my case it was only 2 that I added. after I found which satellites...

I have NO Problems at all running my Elite here in the 1.2 mode. the Elite has been running a 10-fter on a H-mount for little over a year now an has work flawless for me. the problem for most people most likely is a corrupt channel list, an they may not even no that is the problen. A wile back...

Very Nice work Tim :up on that satellite list (xml) Tim. only have 1 grip. wish you would of made it about 6 weeks ago. that list is going to help new AZ owners big time. :up:up:up:up:up:up:up:up:up:up:up:up:up:up:up