Search results for query: *

Using a Blue filter LNB without the Blue waveguide filter?

No magical component to fix... As the issue affects both input DiSEqC sensing and output voltage, i would be suspect of the source of the medium voltage suppy. Could be as simple as reseating the ribbon connectos between tbe main and F-fitting PCB. Place the ASC1 menu for fixed 13V or 18v...

Sorry, we no longer offer repair services on the ASC1.

If no power is outputted from the ASC1 LNB port and no DiSEqC command sensing, likely a power regulator has failed or no power to the f-connector PCB.

The ASC1 does not pass voltage, the LNB DC voltage is provided by the ASC1 and the STB voltage is blocked. I assume that you are using a feedhorn/LNB with servo motor? 1. Does the ASC1 respond to the STB DiSEqC move commands? and ... Does it respond to STB polarity changes (show polarity...

5G carriers DO NOT only affect satellite signals located on the same frequency. What does this mean? If the LNB band pass frequency range allows signals from interfering carriers (such as 5G N77 and N78 low band & High band) to be downconverted and amplified, these strong 5G signals can affect...

Evidently, the building is not in the right position to block the interference. Use a spectrum analyzer, even as simple as the Tiny SA Ultra: www.amazon.com/ALIESTFDNO-Upgraded-Spectrum-Frequency-Generator/dp/B0D3GYBXMH connected to a powered C-band LNBF to determine the direction the...

No such LNB exists. You cannot filter out the same frequencies that you wish to receive. N77 high band extends to 3980 MHz. If your interference was from N78 or N77 low band type 5G, the Red filter would work and you could receive satellite transponders in the 3900 range. If you are unable to...

Yes, often a STB allows a user to enter a custom LO frequency. Shifting the LO will display a "corrected" downlink frequency. This works best with standard type (single LO) LNBs, as these do not require a switch point frequency to toggle between multiple LO ranges. A signal generator can be...

Fake News... When chat GPT doesn't know an answer it makes stuff up! Before you start spreading incorrect AI generated BS regarding the impending loss of the current C-band FSS spectrum in the US, read the actual documents. In the US ( and in North America) 4000 to 4200 MHz is reserved for FSS...

Yes, but be sure they are rated at least 50v

Typically, if needed, the capacitor is placed between the two motor wires in the actuator. I've seen it either soldered at the motor or connected between the screws on the actuator's terminal strip. Have used a torroid 240, type 43 at the actuator and wrapped the control wire bundle around the...

Good catch! The manual was last updated over 10 years ago and no one noted this typo. 0.1 µF, 50 volt would be a good starting value.

The HH120 has a 55mm post suitable for larger dish bracket mounts. The SG2100 was available in two sizes, 42mm and 55mm. In my experience the HH120 has provided better reliability, less slop in the backlash (manual adjustment) and has a much heavier gauge bracket. The Stab motors require a...

Why not assign one of your current receivers to position the dish controller using DiSEqC 1.2 or USALS commands? Maybe network into the Edision or other similar STB?? )I also used TSReader and DVBS PCI / USB device on a PC to remote control using DiSEqC 1.2 and USALS commands. Research Concepts...

It has in the past....

This is how I display streamed content from the Samsung phone (or generic tablet) to the TV. www.amazon.com/Anker-Aluminum-Pixelbook-Compatible-Thunderbolt/dp/B07THJGZ9Z A few years ago, sideloaded a 3rd party generic streaming app on the Samsung 4K TV and was able to watch content directly...

Up until last year, used an old dual core i5 PC running Win 8 and VLC. Also have used an old Android tablet with MX Player or VLC. Als long as you have the codec, no major horsepower to playout the stream.

The GEOSATpro DVR1100c, DSR100c, DSR200c and microHD used the same remote. Later models kept the same key codes, but changed layout and design. Bet that Satellite AV still has NOS units for sale.

OK.... That's just crazy! I thought $500 USD was high!

Possibly fractionally? I think that claim was made by the brands that only offered leg support designs.... LOL!

Hands down, prefer a well constructed buttonhook design over a 3 or 4 leg support. Optimizing the FD and FL is a breeze with a buttonhook... Not so much with 3 or 4 leg supports and shims. Always carried several cans of penetrating oil and added many buttonhook guy wires to customers BUDs over...

Another option is to use "One Cable" solution LNBFs and switches if your receivers support the LO / polarity "one cable" (band stacking setting.

A few members on www.satellites.co.uk forum have done a lot of SWM hacking mods. Might be a good resource for your project.

The VU+ Duo supports Unicable (Band Stacking) for typical "one wire" LNBs , but the satellite tuner does not support the IF range of a SWM LNBF for the Ka B-band (250-750 MHz). Maybe the terrestrial input could be used as it covers the lower input frequency range. The lower IF range is not an...