Search results for query: *

Not necessarily... I have ran across a power inserter that would sound a pocket toner but would not pass frecguency...putting out power matrix seen no switch box detected. removed the inserter and everything worked fine... replaced it and everything fine... put the old one back and no swicth box...

Dont know much about the actual satelites but from what i have been reading how big is this bird? It was stated that its low orbit was 500 miles is it possible for it to be captured by a space shuttle and then be redeployed? I just install satelite receivers so most of this is greek to me.

Sounds like you power inserter for you dpp44 switch is bab(not allowing the fequencey to pass thru)

the way it looks you can add 2 more single tuners or 1 dual tuner with your setup just hook it up to the 34 switch

do a factory reset to default, front panel reset, lock signal on 119 tp 19 . cancel out to get to download screen

just a suggestion ...but try a factory default reset with a hard reboot on each receiver(unplug for 30 seconds)

I have manage to control emerson tv's but have never found a code to control an emerson with any type of built in vcr or dvd or both

Thanks

best guess would be to check with your local DNS or Dish RSP warehouses, some local retail shops might have acess to them

I have been hearing about this also and correct me if im wrong,,, but could these missing channels with a rebbot fix have anything to do with the shuffleling of channels from satelite or transponer to another?

It will work like this, and on the other hand this will also give you ota signal at you tv2 locations, just not digital

Have talked to dish tech support and this is a common issue with the 625 and new software, appartently some (not all) are being effected.

not a clue ( but it would need the 20 inch dish a dp dual and a dp21 switch)

the way dish builds the work orders it will probally state something like orbital install 61.5 hardware required 20 inch dish, dish pro dual, dpp44switch(because of the 4 orbitals) but the installer will more than likely use a 1000.2(but that depends on the installer)

Yes you can use to different tv2 remotes as long as you set up the receiver to accept (uhf tv1 pro setup) and set both remotes to different addresses. the tv1 remotes are not uhf compatable.

With the proper wiring diplexing and splitters, this can be done..(and proper channel modulations) i do it at my house

If it is the same as my 522, hit DVR twice to get to your recordings and on the right hand menu go to sort

What about the new 612's? back to single boxes for each tv...HD capable for each tv(not like the 722 HD tuner one, SD tuner two) not haveing to worry about my TV2 changeing channels when a recording starts..plus the ability to record one program while watching another...) even though they are...

Scrambled brain thought but for some reason reminds me of the ATT homezone boxes, which combines dish satelite, DSL internet and wireless routers....???

If you are usin a dish 1000 with a DPPTwin and a DP dual, then you would need a DPP44 switch, if you have a dish 1000.2 then it already has a built in 4th orbital input that you can tie the 61.5 into

From my understanding single tuners can be owned after the commitment is up, dual tuners cannot. DHPP covers the equipment from accidental damage or acts of GOD. but does not generally cover the service charge. if a lease receiver fails or dish lnb even without the DHPP it will be replaced...

Its not a modulator problems since a reboot fixes it and he stated that he had sound just no picture... its either a faulty receiver or a software problem

The 1000 dish is set up with a dish pro plus twin and a dp dual (the twin should say dp plus on the cover, on that there will be 2 ports on the left side 1 will be used by your first line the other should be empty(this is where your new cable will go) the single port on the right side is the...

ran into something similar yesterday during a new install,722 and a 222 receivers....the tv would flash from a picture to weak or no signal continuosly....the fix i found was during the intermittent picture i went into hdtv setup and change the resolution, accepted the changes then change to...

No the sat signal cannot be split, and since you said that thee is only one cable coming from the dish(ie. the LNB) then you would have to run one from there. which should actually go from there to a groundblock then to you junction in your master bedroom.