Search results for query: *

How can one find how much time they have left in a contract. I looked at my account and it wasn't there.

A few months ago I received a replacement hopper and ever since, I have to hit the red reset to get Caller ID working. This is a real pain as we rely on it to screen calls and it is not until it is not working do we realized that we have a problem. I look at Caller ID settings and it is always...

I need a third Joey in the spa room, now that I no longer have a Old, analog set there. What would my costs be to Lease a Joey (+$7 per month) or by a Joey (varies)+$7 a month?

First, in Dish Anywhere, I get the green LR receiver is ok. But it tells me I do not have DISH PRIMETIME enabled at the hopper (I do) and in profile, it says I do not have an external HD (I do and it works from the hopper). Boradband is ok. I rebooted from Dish Anywhere and it rebooted, so...

It seems the only items I can move to the EHD are ones I manually set a timer on. I can't figure how to move a PTAT recording to this. I am sure it is simple, but tell me how to opy or move a PTAT to the ehd.

Monday the phone interfacand Caller ID (WHICH WE RELY ON) was fine. Tuesday it was not working. Checking tests, it showed Phone Line Not Detected. I checked a the block behind the receiver and it is ok there. I placed a land line phone at the cable that plugs into the Hopper. It was fine. This...

None of my Prime time recordings from last night have Auto Hop on them. From 2 nights ago, they have it. The only thing that happened last night was the Joey's got new sofware. Both days of my prime time recordings had hopper s238 on it. Any ideas?

The unlinking problem with my two Joeys makes it impossible to watch anything on the Joeys. Every 5 minutes something goes blank, or message 1303. Seems DISH could send the common things to try: A new SOlO NODE, A HOPPER. One Joey. SOMETHING. Even new software that some others have had for more...

Just got the OTA module and on the Hopper it keeps asking for my password, which I know, for the off air channels saying they are locked. I go to settings/Parental Contols and remove all. I had locks on adult channels and now I can show nothing checked except None in the parental code column...

oday I started to get the "Linking to hopper" message on one Hoey. Resetting it from the front panel corrects it for a few minutes and it shows up again. On the hopper, it shows a link to both joeys, but on this one joey, it looses program, shows no link and MOCA is full green.

Hopper MOCA problems. Under Settings/Network Setup, at the top is Network Setup where you can select from the dropdown, which ethernet connector is being used or MOCA or WIFI. I can't select MOCA on the Hopper, but I can on the Joey, today. Last time I tried it, a day or two ago, I was able...

I did not notice this until I tuned in a Sirius channel, but after about 10 minuted, the screen dims. Is this by design? I mean any key disables it, but if Caller ID comes in, it is dimmed, too. I've looked under updates and that is not it.

I was moving one joey to see if the remote could be picked up and took the coax off to extend it. But the picture remained. It did not freeze. I could change channels, go to sysinfo and it showed a good link. Well, I know it ended and froze the picture on the other joey, but it did not have a...

I am running one Joey to HDMI and RGB To a modulator to hit 2 small tv's on the otherside of the house and the signal falls off a little too soon for the remote. Is there anyway to extend the range of the Joey remotes? I thought they went to the Hopper and then moved to the Joey's but the signal...

Is there anyway to disable the inactivity timer on the Hopper? I though I saw it once but I can't locate it now. I know where it was on the earlier receivers, but don't find it in setup. Hopefully it is there, someplace, so the Press Setup screen does not come on in the middle of a show/movie.

I tried to cancel Protection on my account on line but I could not find anyway of doing it. How can I do this?

While I understand sports blocking, I was suprized to see the NHL network blocking the replay of last nights Pittsburgh/Philadelphia game. Like if I see it on TV I won't go to Pittsburgh last night to watch it live? Heck, that is a 5 hour drive and we are not in the Pittsburgh DMAwe are in the...

the lick would take you to a aiming play were you could point to where you wqnt your dish and select satellites and it would tell you clearance and obstacles. Can someone help me with this? I am sure it is somewhere here, but search did not help. The answer may have been in one of the thousands...

I'looked all over for this information and only find diagrams for multi receivers being fed by 1000.4 . I think I know the answer. Using a 1000.4, to a single receiver, I can take a feed from Port 1 and feed it to the "splitter" into Tuner 1 and 2 of by 722 receiver, correct?

I have a 21.0 remote, a 6.0 ir/uhfpro and a 6.3 ir/uhf pro remote. The 21 has a switch for ir/uhf inside only. When I started programming this, it was on band A but it is stuck on Band B, now. The 5.3 has a band A_B switch and is fine. Th 6.0 has no switch and is stuck on Band A. So I have a...

I use 3 different feed on TV2, one to my office, one to the spa room and one to the bedroom. All remotes are programmed to use CH 12 for the remote and Ch21 for the video. The sat unit is in DUAL mode, on the 722 (not K) and the rf on ch 21 is working. I checked the remote listing on System Info...

My dish will be moving from the peak of the roof to one of three lower spots when we have a new roof installed. Since the skew won't change, I am looking at putting the mount elsewhere. But I would like to not be suprised at move time by knowing the acual footprint (or foot) size of the roof...

All channels, live or DVR, has a clicking in it. Is this a bug in the 722, or do I have a problem unit?

I saw in one thread, someone saying that if you have leased equipment, then you have a maintenance agreement built in. But I had that and when I changed to the EA, I paid $95. I should have paid $15 if I had a maintenance agreement. In my Dish account I do not see a maintenance agreement, nor a...

Is there someplace in my account on Dish Network showing any commitment. How can I tell if I have one. I do not think I do, but I'd like to know.