Search results for query: *

Now this is odd, I can only get my true south satellite and nothing more. Its not really my true south (since 74W is gone I am talking about AMC6 72). I even bumped the elevation a little and it didn't help. My setup is Primestar 84E SG2100 Coolsat5K and Prof7500

I am in the market for a used pci or usb S2 fta card. I dont want a new one because I will not use it everyday. If this thread is in the wrong place please move it thanks!

Hello, ever since getting into KU I want to go bigger and get a C band dish. The problem is, I live in an apartment building I know they do not care if I put up a C band dish. I noticed that Galaxy-Marketing still has the 6FT WS1870P still for $69. I would like to buy that dish and try to hook...

So I have a primestar 84E dish and my lnb is invacom QPH031. No I have read that the 84E should be only used with its original lnb. I do have that lnb it works fine, but it doesnt get all the channels. I know if I use a multi switch I can get both V and H signals. But I just want to use my...

I think my wiring is slowly dying. For the past few weeks when I turn on my receiver the signal and quality level will be from 4-8. I thought maybe it was my Lnb. So yesterday the lnb was frozen I took it off from the roof, hooked it up directly to the Coolsat7100 and my level was at 85. I...

So I scanned in an SD feed. It even scans in as Service 2 SD, yet when I go to that channel on my Coolsat 5000 its scrambled. I do not want to post the feed here, but if you go blind scan 91 West right now you will find it. The FQ isn't an HD one either.

I hooked up my dish but I want to use my Invacom lnb and not the original primestar lnb. The primestar lnb is the one with 2 ports on it one V and one H. But I think that lnb is on the outs. Because I do get good signal on it then all of a sudden the signal will drop from 75 to 4. When my...

I have done some searching on how to install a 84E dish to the Sg2100. I did the install this evening and its all hooked up. But my issue is the elevation I do not know how to set it. The way I hooked up the dish was I took off the original elevation bracket off the 84E dish. I put a piece of...

I just found this on craigslist. Even though I live in New York this came up but its in Bridgeport, CT. Here is the ad 10 Feet Satellite Dish FREE

So I just got this receiver on Saturday. I got it for cheap at the flea market, I got it for $5. I only really got it because of the pvr. I already have a coolsat 5000 and this 7000 box is way different than my trusty 5000. I found the firmware on this site. The box had hacker software on it so...

A free satellite dish that is!. Its a channelmaster 84E dish. I have seen this dish for years, I was walking home today and I saw the dish on the floor and I asked them if they weren't using it anymore they said no. I asked if I can have it they said yes. Even though I only had to walk 1 block...

Does anyone know why my QPH-31 is reading low all of a sudden? The signal level is reading in the 68-72% range. Since its low I cannot scan in any channels. Everything was working fine a few days ago. The only changes I made was I tweaked the dish via diseq1.2 move fine feature because I wanted...

So I can get 61,74(My true south),79,89,91,93,95,97,105. What I want is 72 for the nbc channels and 83 for RTV. My setup is fortec 36 dish, coolsat 5000,moteck 2100. I had the church channel on 72 but I never got nbc mux. I have tried both usals and 1.2 I am afraid to play with the elevation...

I have a 36in Fortec dish. Now I know that the elevation on these fortec's can be off by 5-7 degrees. So all day I was playing with the elevation and a few times I would be able to get my true south locked on(74W ONN). The picture on my coolsat 5000 came on ok with 68quality. Then I would move...

So last week I had my satellite dish hooked up and everything was working. That dish was a 31in motorized sg 2100 with a qph-031 invacom quad lnb. I was tracking the arc everything was fine. I sold that dish and put up my Fortec 36in dish I was thinking since that was a bigger dish I would have...

I am pretty new and hunting for feeds. So I would like to know how many feeds are there on 74w? Before I started blind scanning I always thought there was a lot of feeds. But most of the feeds I find are on other satellites. Thanks

I have a question. Why when I scan with my coolsat 5000 at times it will take around 10 minutes to scan 97W. Then other times I try to re blind scan and it goes to 100% in less than two minutes and of course it doesn't find anything?

I asked this over at sadoun forums but didn't get any response. So I figured I should ask here. Since I cannot find anyone in NYC to install my motor onto the dish. I was wondering could I just install the motor and point the dish to 74west(my true south) and I will be done?

Ok so I had my motorized dish remounted because trees were in the way. So when they remounted everything they the installers couldn't get any quality. They tried 2 different sat meters as well. Pole is plumb as well. We even tried two different lnbs. All we get is signal but no signal quality...

I have been reading that when hooking up a motor its best to use your true south. So my true south is 73.8 longtitude so I will just round up that I should choose satellite 74w. Horizions 2. But then I was reading on another site and they For example for New York City, the true south will be...

I think my pole that holds the dish is no good. For the life of me I cannot get the pole plumb. I can move the pole up with my hand, I used to be able to move it down but since I put on a new screw on the bottom that fixed that. I even put a new long screw in the middle of the pole and it can...

I have a sg-2100 motor. Today I had it installed, and I noticed on the elevation bracket there is two sides. One is elevation the other is latitude. Now my elevation is 40 and I put it to that side on the bracket. But on the side is latitude now isnt that the same as elevation?

Does anyone know what kind of power drill I can use to install the satellite dish. I bought a 12volt drill and 5/16 bit but it didn't drill through the red brick. I read on Sadoun's site that you would need a Drill and 7/16 5/16 bit. Then I spoke with someone at homedepot and they said I would...

I have a problem I was trying to move the dish to hook up the motor but I couldn't. So when I rehooked up the dish I tighten all the bolts but now its not tight and the dish moved up down left and right. So I have no quality what did I do wrong?

I bought a 90cm dish and company where I bought it from apparently they buy in bulk from Sadoun. Because on the back of the dish it shows a Sadoun sticker. So I had an installer come by but he couldn't get the motor on. He says the 3rd bracket I need is supposed to come with the dish and when I...