Search results for query: *

Can anyone tell me where you can PURCHASE a HR-23 DVR one of these units other than thru DTV service? Thnxs Richard

We just got the Slimline SL5S LNB and inserter and a 8 splitter. Does anyone no where there is some install instructions for this setup? All I can find is for the standard switch which ext and splitter. I no it is simple but would like to see some info on different ways we can insall it. Richard

Hello All, On the one wire hookup SWM and run itr to DTV DVR with twin tuners how does that work with only one cable? Do you need to add a splitter at the reciever? We are thinking of using the new SWM LNBF to use one cable. Richard

Hello We are installing a new AU9-S dish and having a few issues here. Why do we get good signal out of only 2 ports and nothing out of he 2 ports on the AU9-s LNB??

Hello We have just replaced the older sidecar 5LNB dish with the new Slimline 5 LNB dish. The question is that what I read we don't need a switch like Zinwell to make this work because it it has it's own switch built in. We are running 2 recievers Hr-20 700 on HD. When we had the old dish...

Hello We just did a reset of a Philips dsr-7000 dvr and it says it may take up to an hour it has been 2 hours or more so far. It says it is cleaning and deleting do not turn power off. Any help with this one? Rich

I have a HR10-250 DVR which I made a mitake thru the setup and switched the video format to HD and the tv that it is hooked up to now is not hd and we lost the video but the audio is there. How do we get the video switched back I looked in the manual I don't see any thing there to do that, we...

I just got a new SonicView SV-1000 and also a new dish 1 meter Fortec with the INVACOM QPH-031 LNBF ** linear + circular. -- So I removed the old dish and installed the new Stab-120 motor and aligned to the south. I installed the 1 meter dish and put the cable from the SV-1000 to the reciever...

I just got a new Invacom QPH-031 LNBF and I have trying to get it to work. If what I read you take a DISEqC Switch and run a cable from a L & C on lnbf to the switch in and one cable out to the motor to the RX correct? If so I have no signal at the reciever, I have a Fortec Ultra the dish is a...

Can some one tell me if they no of a few compaines in the Chicago area that sell FTA equipment retail and not wholesale only? If you have there web address it would be great. Rich

Anyone no where we can get a dish mount for a rohn 45 size tower. We want to mount a Fortec 90 just above the roof line. The tower is 70 feet tall. I was thinking of using a flat pcs of Alumium and getting some u-bolts and atach to the leg of the tower. Anyone no and has tried this idea? Rich

Where do we find the NYC feeds and like the races and church hill downs I had it tuned in yesterday when tunning the dish than the dish slipped and that was it. What satellite are they on? Thanks Richard

We are trying to get this new setup to work, we are using a Fortec 90 and there LNBF and a DiSEqC 1.2 H-H Motor. The instruction I have been trying to follow here is confusing to us here. --The RX is a Fortec Lifetime NA Classic It says to set the motor el angle to EL/Lat = 43.1 Done The one...

Hello We are having a problem here trying to get 2 RX working on one 5 lnb dish. We had a 3 phase before and it worked fine. We changed out the dish adjusted the dish signal is fine about 99. The problem is that one rx hooked up daul lines for the dish and both work fine. The other rx you...

Hello all, We are new to this great hobby FTA. We are "TRYING" to get our FIRST system working. We have a open spot for the IA5 Sat. We are using a old mounting pole that was used foe a 10 foot c-band dish it plumb and perfect. We are setting up and non motor right now. We are using a brand...

Hello all, I am new to FTA and have a question here. Which Fortec unit is better the Classic or Ultra and which is newer tech?? Rich