Search results for query: *

I just started using DVB Dream and Have experienced a problem with Standard LNBF. The software works ok with a Universal LNBF but I cannot get it to work with a Standard LNBF. I have selected na bandstacked FSS in options/diseqc for G18 and am using a BSC321S. This lnbf works good in ProgDVB...

See where you live from the satellites perspective. One picture is my true south satellite G28 and the other is G18. From this perspectice amazing that I get any signal from G18. You can just see the southern tip of Lake Michigan, where I live near. View from Satellite

:eureka If anyone has one of these please take some detailed pictures of it with a ruler included. I would like to build one from these pictures and will then post test results and a how to make manual. The ring depth information is critical.

DIY Dish Arm The attached manual should help anyone to fabricate his or her own dish arm for an offset dish. The link shows some fabrication methods that are easy DIY. http://www.satelliteguys.us/free-air-fta-discussion/146059-primestar-84e-bsc621-2-lnbf-experiment.html

Does anyone have recommendations for PCI DVB-S software with good switch support and h-h motor Diseqc 1.2. I need 6 X 1 Switch support 22Khz / diseqc.

Broke this away from my thread on Primestar 84E BSC-621-2. In my opinion and from experimentation I'm shelving the BSC 621-2 because this LNBF has too many trade offs in performance. A seperate quality C-Band LNBF and KU Band LNBF will work much better. On a dish smaller then 6' in diameter...

Primestar 84E/BSC621-2 LNBF Experiment Well, as you’ve heard “What’s old is new” I decided to see if I could get any C-Band channels on my 1 meter by .7-meter dish. After searching this site and Sadouns’ forum I found the following links, which add so much to the story...

We have a great list of KU strong transponders but I need a list of strong C band transponders. FTA of course and English.

OK, all you Guru's in C-band, here is a question for ya! I'm setting up a Primestar 84E C-band dish with the BSC-621 after finding Icebergs thread on topic. I see that Sadoun is, maybe, going to offer a "Conical" scaler ring. Here is a pic of Primestar LNB scaler ring for Ku-Band (on...

Can't receive CC with Twinhan card. How do the other receivers work with CC?

Is there software for PCI DVB-S Card that lets you record "DVR Function" directly to DVD?

SG-6000_vs_SG-2100 This is my comparison between these two H-H Motors. Just my opinions folks. SG-2100 1.- Motor bracket distorts when bolts are tightened, this throws arc alignment off. 2.- Backlash adjuster allows hardware to come loose, allowing hardware to jam plastic drive gear...

I would like to know what some of the different receivers display for AMC3 transponder 12180V 30000 3/4. Screen shots would be great! Thanks, Tom

The attached manual may be helpful to those with SG2100 that won't do USALS.

Noticed that there was about a 3% reduction in Signal Quality with the motor inline. Cut the foil coil at the LNBF connector and inserted a 1 Uh choke @ .65 Amps. Signal Quality increased by 3%.

Buyer Beware1 If you have a Twinhan 1025 PCI card and purchase a SG2100 h-h motor it may not work. This the third motor: ALL THREE MOTORS WITH DIFFERENT PROBLEMS "I usE USALS in Twinhan software and ProgDVB software, both with the same result overshoots g10r and g27 as well as echostar to...

ProgDVB 5.15 Now has DTV ATSC decoding and HDTV. It has autoscan so that when you boot the software for the first time it scans your connected HDTV device and lists all the channels. I tested with KWorld USB HDTV stick. I just installed it in my Gateway laptop running Vista Home Premium...

DVB-S and DVB-T in one slick program. **** New product: ProgDVB SolveigMM MPEG Editor. And some new skins. New release includes ATSC support for OTA DTV. DVB-S Supports Channel Search, Transponder Scan and Blind Search improved. NBC 8qpsk, 4.2.2 with Elecard codec. This is much...

I looked on the NAB and FCC websites to find Symbol and Pid assignment for transponders but no luck. Does anyone know of a list that shows each OTA transponder data?

Has anyone experienced a SG2100 overunning the correct satellite east or west when using USALS?

I use this to make smoooooth azimuth adjustments.

This is what I use to overcome all the varied errors in dish hardware.

This is a 1/4" eye bolt threaded thru the motor tube to give you micro adjustment of elevation without the weight of the dish.

ProgDVB version 5.14.8In Toolbar go to settings, options, cursor all the way to right for "others" change setting from normal to real time. WOW, great video rendition with Cyberlink Video Decoder. However, If you minimize ProgDVB and go to the internet to check your email....halting...

C:>program files > transponders > all > open with Notepad. scroll down to 2370=Galaxy 10R > insert 2368=Galaxy 18. OR cut 2370=Galaxy 10R and add 2368=Galaxy 18Scroll down 70% to below [2350] above [2370] insert [2368] and copy and paste all of the Galaxy 10 R Frequencies OR just rename [2370]...