Search results for query: *

Hello Gents Thanks for the information, I try to change sats today and the motor is not moving I don't think is set up correct, the last time i setup a ku dish with an Invacom lnb was many moons ago, I remember I had to connect 2 outputs from the LNB to a diseqc 4x1 switch the output went to the...

Thanks Brct203, I kept playing with it and got it going, the problem was the settings under the Tuner setup, here is a picture the way is setup now and working. I haven't try to move the dish to a different satellite yet, I hope it works, find out tomorrow.

I got my switch today hook it up and is does not work, I try other multiswitches I it scan some channels, some are duplicates, how do you set up the twin LNB'S using diseqc switches. Please let me know. I will keep on messing with the multiswiches. Regards. Chewie

Hello Guys

It looks good iBoston.

Thank you guys, I will let you know if it works. Regards. Chewie

Thanks Magic, I order one of them is a brand new one, so they say lol. Comf - don't feel bad, I had one and threw it away :deadhorse:deadhorse2

Hello Guys I have a twin Ku Inverto black Ultra LNB and a C-BAND C2-PLL Dual output, I want to be able to connect both to 2 receivers or maybe 3, I want to receive ku and c-band channels on each receiver, I been looking to around to find out which switch or switches I should use, would a...

I use Dr. HD 1000S+ is an awesome meter.

This is what I get at 114.9W

I change the LNB to a Universal LNB and is not getting it, I was getting them with the MK -1 lnb. I might have to go back to it.

I also set up the open VIX and is running very smooth, I think we got us a very good receiver with lot's of support.

Here is a picture of 125W Music Choices.

Hello All Just wondering if this Mux still active. Let me know. Thanks in Advance. Regards. Chewie

Thanks all of you for this information I will give a shot and see how it works . Regards. Chewie

Hello Gents I have some more questions, please take a look at this diagram on how to connect my dishes and OTA antenna, is it possible to connect them this way?, I been reading about diplexers and it may be to much insertion loss, or is there better diplexers that have low insertion loss that I...

That is very good CN, in my area I don't get lots of winds my dish is facing south, the winds blow from east to west, as you can see on the pictures, the east side is my neighbors house and it blocks some of the wind, the north is the back of my dish and the roof blocks most of the wind and so...

Hello raydio I not to worry about the speed of the motor, I will keep it for now, I am don't know where to get a polar mount or it has to be home made. Is a good motor, there is an option on enigma@ under the tuner configuration mode call extra motor options and under there is an option call...

Hello All The dish is on top of my patio and the Stab motor is tracking from 125w to 87w I still need to fine tune it some more, is there anyway to speed up this motor is very slow but it tracks very good. I need to buy a good RG6 cable, what is a good brand? Let me know. Thanks in advance...

Hello Brian you were right on the money, the elevation of the dish was wrong, I set it to around 24.5 and got the signal and was able to scan a few channels from 117W, the motor is not tracking the Arc properly sat's are off so I have to fine tune it, well the dish is going on top of my patio...

I will get it going I just never had a Stab motor before, Mainly I need to know the elevation of the dish.

Hello Guys My latitude is 34 and that is what I have on the motor and the same for the dish, I am aiming at 117 west Sat

I Tested the dish outside the Patio I took those pictures after the dish was assemble, it was raining at the time.

Hello Gents I have started a new project is a 1.2m solid dish, Stab motor, non-penetrating mount that will go on top of my patio, I assembled it on the ground for testing and I am having problems. According to the Stab instructions it should be set to my Latitude and is set to 34 degrees, now...

I have noticed that the SNR % level has changed I think is more realistic, when I got the receiver the readings were to low.