Search results for query: *

Got it! Thanks

I must be doing something wrong. When I check "The List" for G-19, I`m seeing only about 20 channels shown.

Thanks for your offer of help, I neglected to mention that my 922 is due for a battery replacement. Because of a recent health issue my left hand is not fully functional so I am unable to perform this task. CS

mmewrench: Your post was most helpful. I would like to use my 922 to view DCII FTA programming. Remapping is beyond my capability. I have been trying to find a reputable vendor to do this for me. My other intent is is to use the Micro HD FOR FTA, mostly on C-Band. I have the splitters and Diseq...

FaTAir: Thanks for the reply and help in getting me started. I have the sats programmed in my 922 so I`ll start with G-16 as you suggested and report back. It may be a few days as we are away for the weekend.

Yes I have a Diseq to select C or Ku bands and NORSAT LNBs. Sorry I didn`t list this in earlier posts.

turbosat: Thanks for your reply. I am planning to use my 922 to move the dish. The dish is properly aligned and the actuator is functional.

I am in need help in setting up my FTA equipment. Specifically which is the best satellite to tune to (C-band or Ku) on my DSR-922 and how to get a strong channel on my MICRO HD. I have a 10 foot winegard dish with C/Ku capability connected to a DSR-922 which has the TDT maxed out so I can`t...

Lak7 - The connecting diagram shows the the power passing side of the splitter is connected to the DSR922 for both the C & Ku inputs. Is that correct?? It would seem that they should be connected to DiSEq switch?????

Lak7 That`s exactly what I needed. Thanks for sharing your knowledge.

Thank you Lak7 for the reply to my request for help. I have ordered the splitters which you recommended. I`m not clear on the power passing feature. I assume it is a requirement to access the DiSEq switch ?? Also, would you please give me some guidance on the hookup?? I know that one set of...

I`m digging out my CoolSat 5000 and setting it up for FTA. I need a manufacturer and part number or specifications so I can obtain 1 X 2(out) splitters to tap into the C Band & Ku Band input from my BUD to my DSR922. I`m planning to route 1 output to my DSR922 and the other to a CoolSat DiSeq...

I`m looking for help in setting up the inputs to my CoolSat 5000 receiver. The C and Ku feeds from my 10` BUD currently each are going into splitters which feed my DSR922. I want to take another output from each splitter for my CoolSat 5000 which I`ll be using for FTA. How do I combine the C &...

My Winegard is a 10 foot perf but the hole size is bigger then .125" as I remember. I should really measure it. I`m 45 miles north of San Diego.

Ice: I`m just interested in the SD US & Canadain locals. Once I confirm my Winegard will give me good reception, I`ll PM you to implement service & receiver.

I`m wanting to get set up for StarChoice but before purchasing a receiver and subscription I would like to be sure my Winegard antenna will give me good reception for the Detroit and Seattle locals. Is there any FTA on F1R which I can pick up with either My CoolSat 5000 or DSR-922? It`s not...

Thanks, the link takes you to Solid Signal. I called to see if they had them in stock. The 411F comes from a distributor and SS didn`t know if the distributor had them in his stock. Solid Signsl doesn`t carry the WSG94 weatherproof case.

I`m in need of a Spaun SAR411F DiSEQ switch and the WSG 94 weatherproof case. I had purchased these from Suburban Electronics but they no longer carry them. Can someone recommend a vendor with good prices who stocks these items?

The NorSat LNB`s are separate units which mount to the CoRotor II+. Your receiver will select the proper LNB depending upon the satellite you choose (C or Ku).

The NorSat 8115 (C Band) and 4106A (Ku) along with the CoRotor II+ are my recommendations, if you`re looking for the best.

Congrats to "Ice". His posts always mean something. I can`t begin to count the times he`s answered my questions and bailed me out.

There are several Spaun 22kHz switches in their catalog. There`s the SUR 210F, 220F & 212F. I`m wanting to order the correct one but don`t know which is the proper one for my application as outlined in my Post #1.

Did you try the Dish Doctor?? He`s in the South Bay........ I can give you his EMail if you can`t find him the telephone book.

Thanks Anole, I got your information. I had missed the link in post #7 but now have reviewed the post. I may use the Spaun switch that is referenced in the link. I am partial to Spaun as I don`t like having to get up on my roof and my Spaun DiSeq has been excellent.

Thanks for the replies. My lnbs are DPs except for one which is an old DTV which I had to use for fitup with the support on my 1M Winegard dish. Can I get arecommendation on a vendor and part number fo rthe Encoda? Anole: I`m unable to locate the link you referred to in your reply.