Search results for query: *

I Want to Win!! Sent from my ONEPLUS A3000 using the SatelliteGuys app!

I Want to Win a Free DVBS2 Receiver

I'll take a few pictures in the morning. The dish itself is skewed about 23 degrees and the lnb is in a mount where I can fine tune it. Sounds like I've been using the wrong lnb to aim though.... Posted Via The FREE SatelliteGuys Reader App!

For the initial setup I'm not using a switch I'm set for universal 9650/10600. I'm doing my alignment with the right lnb (looking at the dish face) aiming for 97w. Alignment is good as I can get the weaker RT transponder. Disconnecting the right lnb and going to the left should yield me 101w...

Hi folks, I've purchased a WS esx521u-am adjustable lnb and I've got some difficulties with hitting 97w and 101w. I can hit either SATs fine on either lnb without difficulty but I can't get both is there any tips out there? BTW I'm using a au9 slimline to do this since it was free and I figured...

Though I have yet to record on the Amiko A3 it supports dlna and mounting network drives with a sufficiently fast network ie gigabit and remote storage offering NFS, samba and dlna you could easily implement something with xbmc, roku or anything else that can stream mpeg4 and mpeg2. You'd come...

Shipping is my biggest concern getting a 36in geosatpro wasn't cheap once that figure was added. I've seen 6 to 8 ft dishes for sale in various places but shipping doubled the price yuk! Posted Via The FREE SatelliteGuys Reader App!

Hi everyone, I've gotten pretty good with my ju setup with multiple dishes, mirror switches etc. I'm about to upgrade to C band either purchase something new or rehab an older setup if the price is right. I'm located in NEPA an 40 minute drive to Allentown, Scranton, and Wilkesbarre if there's...

Looks like it's a no go: http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=34663 Posted Via The FREE SatelliteGuys Reader App!

Possibly http://wiki.xbmc.org/index.php?title=Raspberry_PI_FAQ "H.264 (up to High Profile)" Posted Via The FREE SatelliteGuys Reader App!

Hi folks has anyone noticed any strange breakups on 121w? I'm using an azbox minime and Manhattan rs1933 both are experiencing breakups and pixelation on my converted dish 1000.4 eastern arc dish with a avenger lnb. If I switch to my motorized dish with 90cm geosatpro dish I'm not experiencing...

So sleek black :) Posted Via The FREE SatelliteGuys Reader App!

I can vouch for 72w just a quick 5 minute swap to a linear lnb and matching bracket. Instant nbc 71-72 quality in northeast pa near Allentown Dan

No problems in Jim Thorpe area in Carbon county 90% signal 74% quality motorized ws7630, qph-031 on a Manhattan rs1933 Dan

dougruss: I have it connected exactly in your diagram, my switch handles up to 500mA I'm not sure what the motor is rated at but I'm sure it's higher than half an amp. I've also swapped the DiSEqC switch for a 22Khz switch with the same results so I'll try moving it with the LNB disconnected but...

Hi All, Second post, so I got the Manhattan RS-1933 and a S6000 Motor on a WSI 7630, I recently decided I wanted the little bit that's up there on circular so I picked up the QPH-031, I'm impressed that it's a little better in reception/quality for any sat I throw it at however it seems to come...

I'm using USALS with the 4.4 firmware, it's quick to say no signal on a satellite after just moving to a new location however if I give it 30 seconds or so the channel comes up. Otherwise it's been smooth sailing....

Thanks all for the help I'm up and running & motorized! It appears that I was having a LOS issue moving my dish higher up the mast helped tremendously as well as some helpful tips from everyone about the nbc mux on 72 and my motor settings thanks again!

Sorry for the delay the weather didn't cooperate. I snapped a few pics of my setup and the install site. I double checked my mast it was dead on so no issues there. I haven't had an opportunity to really mess with it today but here's what I got.

Thanks for the info. My True south sat is supposed to be brasilsat b3 but there's no active transponders according to Lyngsat. I've been trying my alignment against AMC 6 and Galaxy 19. I have no LOS issues until I get extreme west and no obstructions to the east. I'm doing this on a porch roof...

Hi Everyone, I'm a little new to the FTA world however I've set a few DSS dishes in the past (Directv 3lnb) however I'm having trouble locking on to anything using a motorized setup I purchased: My Setup is: Manhattan RS-1933 WS7630 Dish SG6000 HH Motor DMS Spitfire Elite Universal LNBF...