Search results for query: *

I was able to install the Enigma 2 PVR in Kodi: Telnet - opkg install kodi-addon-pvr-vuplus and it will install it Start Kodi and enter the MIO 4K IP address in the E2 client. I have problems with this - "scan tp 422, you have in the e2 ch list, start kodi, open pvr Client, they Show...

Hello All I try to install the this procedure on my Zgemma receiver and it did not work, I do not use telnet very often, so maybe a user error, I used Putty, and these are the files I uploaded maybe the files are not correct, maybe someone with more experience with Telnet can make it work, I...

Hello All I was looking in the VIX forum and saw the Thread on 4:2:2. https://www.world-of-satellite.com/showthread.php?62803-4-2-2-Feeds-(Feedhunting)-mit-OCTAGON-SF8008-4K Check it out maybe it can work for the MIO's receivers. Regards. Chewie

Hello Fireball I have one of these receivers, regarding the blind scan, it only blind scans the KU-band and is ok, for c-band you have to make some adjustments to be able to blind scan C-band but the transponders information is not correct, the flash memory is to small, you have to add a 8g...

Hello All Does anybody know how to adjust the colors on the Mio receivers. Please let me know. Thanks in advance. Regards. Chewie

I looked up the information and the one I saw it does not have a off/on switch, is ok .I am sure it will be a good receiver.

Hello Brian Does it have an off/on switch?

Hello Guys Thanks for the information. Regards. Chewie

Hello All I have a question on how to set the correct frequencies when use User Defined on the satellite setup screen on Enigma Receivers. I always get confused on it, I need to know which frequency should I input that will cover all the Ku satellites. LoF/L LoF/H Threshold On the Blind Scan...

I have the 955Q and it works well and I get around 150 channels on the Vix Image I do Manual scan on my boxes.

mem I have The SatDream image set as the main image slat one, before I had the OpenATV and found out that having the SatDream image as the primary image is a lot easier to set up multiboot. If you change the primary image to a different image it will erase all the images in multiboot.

There is a Plugin under plugins call openmultiboot that you install either on a Hard drive or USB memory stick and you can use it to install other images and boot the receiver on these images. Regards. Chewie

forgot this.

Here is another program That I use, to telnet, ftp,upload packages,openwebif. it works very good.

Hello All Does any body knows how to delete the images on the multi boot slats, or just installed a new image over the one already in the slat.

Hello All Does any body knows how to delete the images on the multi boot slats, or just installed a new image over the one already in the slat.

Ok it works, I was pressing the red button and not the red power button.

This does not work for me.

If you are using the SatDreamGR image: 1- go to Menu>Standby/restart>multiboot. You will see a screen like this: Press the up/down keys on remote to select the images after selecting press the green button to change the image.

This is what I do to switch Images: If you are using the ATV image: 1- go to Menu>Standby/restart>multiboot. You will see a screen like this: Press the < > on the remote to select the images after selecting press the green button to change the image.

+1

I try the Link and still does not work, it wants permissions.

Hello Guys Regarding the signal level, the highest I seen is about 67%, what kind of signal levels are you guys getting? Let me know. Regards Tunder.

Hello Brian I have Ortho feeds for my C and Ku bands, and always had problems with the Ku having duplicates channels, tonight I follow your suggestions to set the threshold to 11700. This is my setup now and I do not get any more duplicates so far on Ku. Thanks this work for me. Regards. Tunder

Hello raydio What are you settings when you select User for: LOF/L LOF/H Threshold