Search results for query: *

4.2 TNAP has been on my mio4k for most the year of 2022 now and lots of reboots and multi boots into other slots with no issue. 4.2 has a newer kernel the signal finder like open Vix and the see the service list with the yellow button and a driver update for the 950Q ATSC tuner that fixes the...

As far as I know you flash the test image of tnap 4.2 then online update adds new boot logo and it does not show test image anymore on the about page.

Try Dream-Explorer. Move/Copy works with Dream-Explorer and TNAP4.

Those commits you see are for openpli current develope image.The TNAP 3.2 is based off openpli but it has the update server changed. That way only the updates useful for North America will be added if needed. I noticed the Fox News Channels on 99w KU-band (audio only) SR 1000 also is found now...

Yes settings file.Copy and paste the nims with notepad++ As for channels and bouquets transfer from etc/enigma2- from other image. bouquets.radio, bouquets.tv, lamedb, lamedb5, userbouquets.fav.radio and userbouquets.fav.tv. You need to telnet "init 4" stop enigma>transfer files then " init 3"...

I think the driver for the audio level is good.Starting at 0% each 5% I can hear it get louder just have to get up high to get a good sound level. Just wish The Orby box had sound level it's bad here between sat. and ota just have to adjust the tv volume.

Yes that sounds right with over 70 volume level. All my enigma2 boxes are the same way. Comparing volume between sat. and OTA my mio is loader on OTA channels but not by much. I usually only have to adjust the mio volume down by 5% when going to OTA and back up 5% when on a sat channel. Really...

I don't see London on the list here. I know you flashed the emmc version and I flashed the multiboot version of TNAP 3.2 so maybe there is a difference. Might put the multiboot version in slot 2 and see.

John, Did you download the USB.zip? Seems the Mio4k didn't flash an image at all. You will see a white screen come up saying something like software upgrade and the file name. After the flash finishes and reboots remove the thumb drive. Steven D. A.

Did you have other images in other slots? You can use the blue recovery screen to boot another slot. Power cycle or while the box is rebooting as soon as you see the Edision splash screen press menu button on the remote.

Have you got puTTy and filezilla? Might can fix by init 4 (stop enigma) with puTTy Then with filezilla download and edit the settings file in etc/enigm2 Look for config.skin line(s) in the settings file and remove the line(s). puTTy init 3 (restart enigma).

I found how to restore the auto backup Plugins menu /software management/ Advanced options /Advanced restore/PLi-AutoBackup.tar.gz then press green button.

I never use that auto backup feature I use backupsuite and make complete backup but I did just test the Auto backup and what I had to do was change the Backup location from root to USB then press yellow button for Manual backup and it did make a backup to Media/usb/backup. I think the only way...

Here's a quote from the Openpli wiki "Having the right time is essential when using timers, as OpenPLi gets it at startup from a transponder, it is wise to make use of the Startup service. By doing so and choosing a reliable transponder you will always have the right time."

That's fine but all I know is I use transponder time with over the air as startup service and my time stays correct and accurate as long as system time plugin is removed. Before I removed system time I got the 2070 date also.

You have the Hauppauge tv tuner right? If so then go into plugins and red button to remove plugin, remove system time. Now setup a startup service with an ATSC channel by when on the channel selection screen choose the channel you want to use and press menu and set as startup service. Every time...

Go into Expert settings in the setup menu and Recording paths and change timeshift location to media/usb or media/usb/timeshift should work also.

You can flash that openvix image as multiboot also just leave it zipped and put the file in downloaded_images folder and flash with the Flash image menu of Tnap or Openpli. Or if you already have a copy of openvix installed use the image manager and download the flile with the yellow button on...

https://legitfta.com/forum/showthread.php?26755-TNAP-3-Images-for-OSMIO4K-20200305

I believe even if you go back and flash an old version of Openpli the drivers in the feeds are for kernel version 5.3.0 and the 950Q will still not work. I recommend instead of Openpli use Tnap3 because it has kernel 5.5.0 and supports the 950Q and the drivers are preinstalled.Also the blindscan...

To flash from vix download a multiboot image and leave it zipped and with filezilla send file to your hdd at media/hdd/imagebackups then with remote control menu/setup/vix/image manager.

I think T2MI has been a work in progress and from my experience the tuner driver is a little buggy requiring reboots after some blindscans. I have the no T2MI tuner driver on all my 4 slots and they are running kernel version 5.5.0. images. The newest kernel is 5.5.9 but haven't upgaded.

Openpli does not come with blindscan. Download the plugin with the plugin menu. Was the images you tested current? All the image teams use the tuner driver provided by Edision and they should work the same as long as they are the same kernel version.Tnap3 uses a driver that works best for...

I was slow to reply was ckecking things. I see you got it.

Maybe you need to be not online but if you have a hdd connected you can ftp the zipped multiboot image into media/hdd/images folder and it shows up as Downloaded images when on line and use flash online.