Search results for query: *

Hello All I tried your suggestions and still was not able to get them. Thanks. Regards. Chewie.

Hello Guys I am back to fta, I am retired now and have more time to play with my dishes now , I am looking for information on this TP 3830H The Azteca Channels, about 3 weeks ago i was able to receive these channels on SAT 113 AND 99, but now they are gone or moved somewhere else, I blind...

Here is this dish in my area: C band satellite dish Regards. Chewie

Hello CN I don't think so, my dish is only 4 panels, and if you look at the dish ribs the thicker ones that is where the panels join together, so there is only 4 panels, the panels are about 5 feet.

I have the same dish, easy to work with and good performer. buy it don't mess around.

he cut the price to 300.00 dollars.

Thanks Martin, the price for it is 45.10 dollars, I am not sure if this is the same receiver, I try to e-mail but I don't understand the language. Regards. Tunder

Hello Martin Can you share the information on the store you purchased the Uclan receiver, I would like to order one, do you know if they ship to the states? Please let me know. Regards. Tunder

Here is another Receiver Ustym 4K PRO is identical to the SF 8008, is also 4k, 2 tuner DVB-S2X, I have the Octagon SF4008 I was really disappointed on this receiver they never came up with blind scan, the Octagon SF8008 is selling in Europe for about 135 dollars plus shipping. The Ustym 4K PRO...

As with any switch, over current can potentially cause the contacts to weld together, the bad switch was always reading shorted.

Hello Guys I am lucky guy today, I checked another actuator that I have and found out that it had the same reed sensor as the Venture actuator, bench tested the older actuator I was able to see the reed switch opening and closing using my digital fluke meter and setting it to lowest range for...

Hello Guys Thanks for the advice, I have a Venture Actuator, the motor does run east and west, I ohm out the sensor and with no power to the actuator it reads closed, when The motor is moving it always reads closed, it never opens and closes. bpalone - it looks like my actuator has the same...

Well, I replaced the cable from the ASC1 to the actuator and still the same thing same messages, I replaced the ASC1 with my other ASC1 and no change, so, therefore I think the sensor on the actuator got fried, If any member has any ideas or suggestion, please let me know. I have another...

Thanks guys Got a good wife she does not complaint about my FTA habit, regarding the cable, I am using sprinkler wire, have a long extra piece of the same wire, I will swap it in the morning, hopefully this is the problem . Regards. Tunder

Hello Guys My wife was working on the yard today and and digging on the ground with the shovel and hit the actuator wire, now when I try to move the dish to another satellite it just clicks one time and moves a step and the ASC1 displays Reach W/E LIMITS limit switch? sensor? Motor blocked ? Is...

Hello A33 I found out that Enigma2 firms made some changes to the LOF options, under the tuner setup they assigned Circular Lnb = 10750 for Standard Lnb, I was using option Universal LNB and this is where I get the duplicates, now I can use the Circular LNB option and no more duplicates, is...

Hello KE4EST Thanks for responding, I have a Pansat DP-4 FEEDHORN , 4 Norsat lnb's, 2 for c-band and 2 for ku band, they are connected to a WNC 4X8 powered multi switch, the cables are new and the 2 ku lnb's are also new, used 2 different receivers with Enigma 2 software on them and I think...

Hello Gents I am having an issue getting duplicate channels only on the KU side only, I am not sure what is the problem. Any suggestions will be appreciated. Regards. Tunder

hello Gents Got my dish up and running, scan a few sat's so far so good, is not fine tune yet, had to route the coax thru the middle of the dish, they are not long enough to go around the dish. I wonder if it affects the signal. Anyways here are some pictures. Regards. Tunder.

Hello Gents Here is a picture of my new dish, is all painted and ready to go up in the pole the week after next. Regards. Tunder

Hello Jason I was able to find this paint out here, I painted the mount with it and it has a little shine on it , Just wonder if this paint will interfere with the signal quality. Any Information would be appreciated. Regards. Tunder

Hello Guys I just got a General Instrument 4DTV-920, would this work. Please let me know. Regards. Tunder

Thank you Jason.

Hello Jason Regarding the colors that you use to paint the dish, is this Duplicolor Machinery Gray (DA-1612) a flat paint, I looked it up and was not able to find the details, out here is only sold at the auto parts stores for some reason, I like the colors. Please let me know. Thanks in...

Hello Guys I got my dish home, it was perfect, until I drop something and put a hole on the mesh, the hole is about 1 square inch. It only cost me 60 dollars and the owner gave me the receiver he was using, I don't know if is any good for any thing. Here are some pictures, I hope I can fix the...