Search results for query: *

After trying with a cable from the LNB to a TV next to the Pole I get the same results. I have to 2 LNBs which can not switch from V to H or viceversa. I will order a new one just to be 100% sure. Thanks.

HI Guys, sorry for the confusion. I only use ONE receiver at the time. THis is what I just did pointed BUD to Intel 11 @ 43 degrees. Went up the latter and set the Square on the LNB to 9 pm. I get ONLY vertical TPs and I get them scanned as Vertical and Horizontal also, so I get the channels...

Power should not be the problem as when I move it around it works for Horizontal but NOT for Vertical. I will try 3 and 9 O'clock now, I will let you know.

I have: 12 feet BUD Fortec Ultra Mercury 2 Receiver Visat Receiver 2 DMS 621 LNB (Only C-Band) I am not new at installing dishes, but this one I dont know what I am doing wrong. When I Scan from either receiver or using any of the 2 receiver I only get Vertical TP. During the Blind...

Thanks.

I have a 12 feet BUD and several receivers. Can I get the locals FTA in any Satellite? Thanks

WOW,that sound DIFFICULT. Do you have a picture that I can see? To tell you the truth I did not understand how to even start doing what you are saying fixed the problem for you. Thanks.

I was setting this up in the receiver as a Universal LNB... maybe that is wrong. Now I am changing it to 5150 only. I will see. I also noticed even though I am able to find channels It is not finding all of them in Vertical. I get several with strong signal, but not finding all of other ones...

I just scanned Intelsat 14 and 11 (45 and 43 degrees). I got some channels, the strange thing is that it will List Vertical frequencies (when doing a blind scan) and then it tries Horizontal scanning and lists the exact same channels that it got vertically but now with H showing. This happens...

Right now I am next to the dish with a long cable. I will make a very small one, but it was working when I tested with the same cable long time ago. Model BSC421 DMS International. Nothing in the middle. I have a cable connected to the LNBF and from there straight to the receiver Guys, If I...

I only have 2 receivers but only one connected. What I meant to say was that either one only gets Vertical, so it is too hard to say that the 2 receivers are bad. This must be the LNBF. I will start turning it until I get one of the Horizontal and see. Thanks.

THIS BUD WAS WORKING, I JUST HAD TO REPLACE AN LNBF THAT WENT BAD. I got 2 receivers, a Fortec II Mercury and a Viewsat. 12 foot BUD ad a BSC421 LNBF. I have tried the 2 receivers I can only get Vertical channels. I was told the receiver is the one that sends the signal to the LNBF to make...

I wanted to come back to this and update: The problem was my LNBF. It was not switching and only getting H. I thought about that and then started manually turning the LNB and that was the problem. I got a new LNBF. Thanks all for you help.

I have a BUD (12 foot). I use one of those long motor arms. I am also using a VBox. It has been working fine but now when I want to move the motor up is does it really slow. When I want to move it down it works fine. For example if I move 10 point down, to go back those 10 point I may need...

Sorry, Yes, Intelsat Intelsat 11 @ 43 degrees (I am still in the old times)

I am able to scan PAS3R right now. But I am interested in getting TELETICA, which lyngsat lists as Freq 3828 V 3300 Can some one with access to scan this satellite tell me if that is correct? I can scan other channels in there but not this one. In the past I had to mannually enter the...

I have: 12 foot BUD Fortec Receiver VBox V Motor (???Jack brand) Hi Dashaund, I am having a similar problem and I think what happened in my case. It may be the same for you, not sure. I will open a new post for mine but not sure if it is the same as you. I got a 12 foot dish...

Hi Dashaund, I am having a similar problem and I think what happened in my case. It may be the same for you, not sure. I will open a new post for mine but not sure if it is the same as you. I got a 12 foot dish running with a VBox V and a Viewsat and Fortec receivers. Everything working for...

VBCMSR freq 3987 TV, TV2 freq 3760 H3, H4 3845 I am trying to find in lyngsat but can not find anything close. I thought I was at Intelsat 805, but now I am not sure

I am helping a friend set up his BUD. Using a Fortec Mercury II we just scanned this channel: CDN and CDN2 Frequency 4105 (They are showing a beisball game. Where am I? Thanks

ok, got the part of connecting 2 of the cables to the battery, at the other end I do the same but with the leads right? Red lead to one cable and Black to another cable a? And I keep trying, changing one cable at a time until I get a reading either positive or negative, correct? I have a...

Greg, thanks for your answer. I have an electric tester I can use. But I have always been kind of NOT that good using it. I got some questions: 1) Do I need to disconnect the cables at the actuator before connecting the end at the house to the battery? The process I will follow is ...

I got a 12 foot dish BUD for my in-laws. Left it install and my father in law decided to get all the cables, the RG6 and the ones for the mover in a tube so he could hide them. He did but he forgot to mark the cables coming from the mover. I got 4 cables coming from the mover, -,+, right...

gabshere, what do you mean by: some of us have seperate c-band & ku systems ? You mean instead of having a DMS 621-2 LNBF to have like a Chaparral LNB?

I have a Fortec Mercury 2. Connected to a 10 feet BUD. My DMS LNBF went bad. I got a Chaparral C/Ku band. Is there a way to move the diode inside by connecting the polorotator cables to somehting. The Fortec can not do it, and I do nto have a Pansat Receiver. What are my options other...