622 Arrival

yellowcanary73

SatelliteGuys Guru
Original poster
Mar 12, 2006
135
0
Just received my 622 looks like the easy part is over after 2 months and 4 reschedules now for the hard part the install on the 28th hopefully.

Also was looking at the HMDI cable to DVI on MonoPrice .com they have one that is 24 AWG with net jacket and one that is 28 AWG is it going to make much of a difference in signal quality as far as cable size.Need to order tonight

Thanks
 
According to dish tech portal site. Included with the 622 is:

http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/receiver/622.shtml

Cables and Accessories
Standalone List
(1) 5.3 IR Remote
(1) 6.3 IR/UHF Pro Remote
(1) UHF Antenna
Appropriate HD cable for install
(1) HDTV Digital Audio/Video to DVI Cable (8 ft) OR
(1) DVI to HDTV Digital Audio/Video Adapter OR
(1) Y/Pb/Pr 3-Wire Cable (red, blue, green) (6 ft)

(1) S-Video Cable (8 ft)
(1) RCA 3-Wire Cable (red, white, yellow) (8 ft)
(1) RJ-11 Telephone Cable (25 ft)
(1) 15 db Attenuator
(8) 1.5V AAA Battery

Your Installer should be bringing the right cable with him.
 
marathon_1 said:
According to dish tech portal site. Included with the 622 is:

http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/receiver/622.shtml

Cables and Accessories
Standalone List
(1) 5.3 IR Remote
(1) 6.3 IR/UHF Pro Remote
(1) UHF Antenna
Appropriate HD cable for install
(1) HDTV Digital Audio/Video to DVI Cable (8 ft) OR
(1) DVI to HDTV Digital Audio/Video Adapter OR
(1) Y/Pb/Pr 3-Wire Cable (red, blue, green) (6 ft)

(1) S-Video Cable (8 ft)
(1) RCA 3-Wire Cable (red, white, yellow) (8 ft)
(1) RJ-11 Telephone Cable (25 ft)
(1) 15 db Attenuator
(8) 1.5V AAA Battery

Your Installer should be bringing the right cable with him.

Take note of the term "Standalone", usually means purchased model. Also repeated word "or".
 
Last edited:
This is the one you end up with
(1) Y/Pb/Pr 3-Wire Cable (red, blue, green) (6 ft)
all the other was there so I will be ordering the 28AWG HMDI to DVI cable .

Thanks all
 
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)