i have a dsr922 with a 10ft dish. am getting ready to instal ku band lnb. my prob is i am not sure just how to program the ku sats in my dsr with my remote. all the c band sats are already programed. and working well.
creekguy, need's help programming Dsr922 for Ku
- Thread starter bvcrklyon
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 1K
- Status
Register to hide this ad
Moved to C-Band 
to SatelliteGuys, I do not have that model, but there are plenty here who do and someone should be around soon...
to SatelliteGuys, I do not have that model, but there are plenty here who do and someone should be around soon...If its like the 905, its options 6-3-4 (memorize satellites)
That kicks you into the list of satellites
Also make sure the LNB's are set up (options 6-3-3)...I learned that the hard way. Saw C-Band but no KU...the box was set up for C-Band only
That kicks you into the list of satellites
Also make sure the LNB's are set up (options 6-3-3)...I learned that the hard way. Saw C-Band but no KU...the box was set up for C-Band only
It should be options 6-4-4, if the sats are loaded
If they are not there Hit optons 6-4-2 and see if You are setup for Cband and KU
if You are just cband, You can change it there to both. then run the dish to G1-3
and wait about 20 minutes or so, they should load up.
If they are not there Hit optons 6-4-2 and see if You are setup for Cband and KU
if You are just cband, You can change it there to both. then run the dish to G1-3
and wait about 20 minutes or so, they should load up.
- Status
Similar threads
