Dish 625 Problem

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

Dish-Direc

SatelliteGuys Pro
Original poster
Jan 23, 2006
216
1
I have a dish 625...new out of the box......it picks up perfect signal on 119 satellite, put will NOT download the software that it needs......it is stuck on Acquiring satellite....on the screen where it should be downloading software update to program receiver memory. I have tried it for four days now.

Please suggest a fix to this problem.
 
I presume you have hard rebooted it (unplug-set for 2 minutes-replug).

Do a check switch to make sure your sats are coming in OK.

Call dish technical support.
 
The first time you plug in a 625 you have to hook it up to the phone line, I had to run a 100 foot phone line during the installation just so the installers could proceed.
 
I had a couple of these. 322s too. I fixed it with a front panel reset, and then rerunning the check switch and proceeding as normal. If it starts giving you that BS hard drive error message, you'll HAVE to unplug it for a minute, because an FPR won't fix that. This isn't a phone line problem, since he hasn't made it that far into the setup yet.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)